Cement, Concrete, Aggregates and RCC
| Subjects | Links |
|---|---|
| Engineering Mathematics II | Coming Soon |
| Engineering Physics II | Coming Soon |
| Engineering Chemistry II | Coming Soon |
| Workshop Practice I | Coming Soon |
| Engineering Drawing II | Coming Soon |
| Applied Mechanics | Coming Soon |
S.N. | Code Book Used (Description) | IS Code number ( With Download link ) |
|---|---|---|
| 01 | Ordinary Portland Cement, 33 grade- specification | IS: 269: 1989 |
| 02 | Ordinary Portland Cement, 43 grade- specification | IS 8112:1989 |
| 03 | Ordinary Portland Cement, 53 grade- specification | IS 12269:1987 |
| 04 | Rapid hardening Portland cement – Specification | IS 8041:1990 |
| 05 | Sulphate-resisting Portland – Specification | IS 12330:1988 |
| 06 | Portland Slag Cement – Specification | IS – 455:1989 |
| 07 | Super sulphated cement – Specification | IS 6909:1990 |
| 08 | Low-heat Portland cement – Specification | IS 12600:1989 |
| 09 | Portland pozzolana cement Part 1 (Flyash based) – Specification | IS: 1489-1:1991 |
| 10 | Portland pozzolana cement (calcined clay-based) – Specification | IS: 1489-2:1991 |
| 11 | White Portland cement – Specification | IS 8042:1989 |
| 12 | Hydrophobic Portland cement – Specification | IS 8043:1991 |
| 13 | Masonry cement – Specification | IS 3466:1988 |
| 14 | Oil-well cement – Specification | IS 8229:1986 |
| 15 | High alumina cement for structural use – Specification | IS 6452:1989 |
| 16 | Specification for Standard Sand for Testing of Cement | IS 650:1991 |
| 17 | Integral Waterproofing Compounds for Cement Mortar and Concrete -Specification | IS 2645:2003 |
| 18 | Method of Test for Permeability of Cement Mortar and Concrete | IS 3085:1965 |
| 19 | Methods of sampling hydraulic cement | IS 3535:1986 |
| 20 | Specification for Pulverized Fuel Ash, Part 1: For Use as Pozzolana in Cement, Cement Mortar and Concrete | IS 3812-1:2013 |
| 21 | Specification for Pulverized Fuel Ash, Part 2: For Use as Admixture in Cement Mortar and Concrete | IS 3812-2:2013 |
| 22 | Methods of physical tests for hydraulic cement, Part 1: Determination of fineness by dry sieving | IS 4031-1:1996 |
| 23 | Methods of physical tests for hydraulic cement, Part 2: Determination of fineness by specific surface by Blaine air permeability method | IS 4031-2:1996 |
| 24 | Methods of physical tests for hydraulic cement, Part 3: Determination of soundness | IS 4031-3:1988 |
| 25 | Methods of physical tests for hydraulic cement, Part 4: Determination of consistency of standard cement paste | IS 4031-4:1988 |
| 26 | Methods of physical tests for hydraulic cement, Part 5: Determination of initial and final setting times | IS 4031-5:1988 |
| 27 | Methods of physical tests for hydraulic cement, Part 6: Determination of compressive strength of hydraulic cement (other than masonry cement) | IS 4031-6:1988 |
| 28 | Methods of physical tests for hydraulic cement, Part 7: Determination of compressive strength of masonry cement | IS 4031-7:1988 |
| 29 | Methods of physical tests for hydraulic cement, Part 8: Determination of transverse and compressive strength of plastic mortar using a prism | IS 4031-8:1988 |
| 30 | Methods of physical tests for hydraulic cement, Part 9: Determination of heat of hydration | IS 4031-9:1988 |
| 31 | Methods of physical tests for hydraulic cement, Part 10: Determination of drying shrinkage | IS 4031-10:1988 |
| 32 | Methods of physical tests for hydraulic cement, Part 11: Determination of density | IS 4031-11:1988 |
| 33 | Methods of physical tests for hydraulic cement, Part 12: Determination of air content of hydraulic cement mortar | IS 4031-12:1988 |
| 34 | Methods of Physical Tests for Hydraulic Cement, Part 13: Measurement of Water Retentivity of Masonry Cement | IS 4031-13:1988 |
| 35 | Methods of physical test for hydraulic cement, Part 14: Determination of false set | IS 4031-14:1989 |
| 36 | Methods of physical test for hydraulic cement, Part 15: Determination of fineness by wet sieving | IS 4031-15:1991 |
| 37 | Method of chemical analysis of hydraulic cement | IS 4032:1985 |
| 38 | Definitions and terminology relating to hydraulic cement | IS 4845:1968 |
| 39 | Specification for flow table for use in tests of hydraulic cement and pozzolanic materials | IS 5512:1983 |
| 40 | Dimensions and materials of cement rotary kilns, components and auxiliaries (dry process with suspension preheater) | IS 8125:1976 |
| 41 | Specification for jolting apparatus for testing cement | IS 10078:1982 |
| 42 | Specification for vibration machine for standard cement mortar cubes | IS 10080:1982 |
| 43 | Specification for apparatus for measurement of water retentivity of masonry cement | IS 10850:1984 |
| 44 | Specification for planetary mixer used in tests of cement and pozzolana | IS 10890:1984 |
| 45 | Specification for calorimeter for the determination of heat of hydration of hydraulic cement | IS 11262:1985 |
| 46 | Specification for cylinder measures for determination of air content of hydraulic cement mortar | IS 11263:1985 |
| 47 | Specification for granulated slag for the manufacture of Portland slag cement | IS 12089:1987 |
| 48 | Method for colourimetric analysis of hydraulic cement | IS 12423:1988 |
| 49 | Methods of analysis of hydraulic cement by X-ray fluorescence spectrometer | IS 12803:1989 |
| 50 | Method of analysis of hydraulic cement by atomic absorption spectrophotometer | IS 12813:1989 |
| 51 | Specification for Coarse and Fine Aggregates From Natural Sources For Concrete | IS 383:1970 |
| 52 | Coarse and Fine Aggregate for Concrete – Specification | IS 383:2016 |
| 53 | Plain and Reinforced Concrete – Code of Practice | IS 456:2000 |
| 54 | Code of Practice for General Construction of Plain and Reinforced Concrete for Dams and Other Massive Structures | IS 457:1957 |
| 55 | Method of Tests for Strength of Concrete | IS 516:1959 |
| 56 | Methods of sampling and analysis of concrete | IS 1119:1959 |
| 57 | Code of Practice for Prestressed Concrete | IS 1343:1980 |
| 58 | Methods of Test for Aggregates for Concrete, Part I: Particle Size and Shape | IS 2386-1:1963 |
| 59 | Methods of test for aggregates for concrete, Part 2: Estimation of harmful materials and organic impurities | IS 2386-2:1963 |
| 60 | Methods of test for aggregates for concrete, Part 3: Specific gravity, density, voids, absorption and bulking | IS 2386-3:1963 |
| 60 | Methods of test for aggregates for concrete, Part 4: Mechanical properties | IS 2386-4:1963 |
| 62 | Methods of Test for Aggregates for Concrete, Part V: Soundness | IS 2386-5:1963 |
| 63 | Methods of test for aggregates for concrete, Part 6: Measuring mortar-making properties of fine aggregates | IS 2386-6:1963 |
| 64 | Methods of Test for Aggregates for Concrete, Part VII: Alkali Aggregate Reactivity | IS 2386-7:1963 |
| 65 | Methods of Test for Aggregates for Concrete, Part VIII: Petrographic Examination | IS 2386-8:1963 |
| 66 | Methods for Sampling of Aggregates for Concrete | IS 2430:1986 |
| 67 | Code of Practice for Bending and Fixing of Bars for Concrete Reinforcement | IS 2502:1963 |
| 68 | Integral Waterproofing Compounds for Cement Mortar and Concrete -Specification | IS 2645:2003 |
| 69 | Methods of testing bond in reinforced concrete, Part 1: Pull-out test | IS 2770-1:1967 |
| 70 | Method of Test for Permeability of Cement Mortar and Concrete | IS 3085:1965 |
| 71 | Code of practice Concrete structures for the storage of liquids, Part 1: General requirements | IS 3370-1:2009 |
| 72 | Code of Practice Concrete structures for the storage of liquids, Part 2: Reinforced concrete structures | IS 3370-2:2009 |
| 73 | Code of Practice Concrete structures for the storage of liquids, Part 3: Prestressed concrete structures | IS 3370-3:2009 |
| 74 | Code of practice for concrete structures for the storage of liquids, Part 4: Design tables | IS 3370-4:2009 |
| 75 | Code of practice for the use of immersion vibrators for consolidating concrete | IS 3558:1983 |
| 76 | Specification for Pulverized Fuel Ash, Part 1: For Use as Pozzolana in Cement, Cement Mortar and Concrete | IS 3812-1:2003 |
| 77 | Specification for Pulverized Fuel Ash, Part 1: For Use as Pozzolana in Cement, Cement Mortar and Concrete | IS 3812-1:2013 |
| 78 | Specification for Pulverized Fuel Ash, Part 2: For Use as Admixture in Cement Mortar and Concrete | IS 3812-2:2003 |
| 79 | Specification for Pulverized Fuel Ash, Part 2: For Use as Admixture in Cement Mortar and Concrete | IS 3812-2:2013 |
| 80 | Methods for testing the performance of batch-type concrete mixers | IS 4634:1991 |
| 81 | Code of Practice Ready-Mixed Concrete | IS 4926:2003 |
| 82 | Recommendations for detailing reinforcement in reinforced concrete works | IS 5525:1969 |
| 83 | Method of Test Splitting Tensile Strength of Concrete | IS 5816:1999 |
| 84 | Glossary of terms relating to cement concrete, Part I: Concrete aggregates | IS 6461-1:1972 |
| 85 | Glossary of terms relating to cement concrete, Part II: Materials (Other than Cement and Aggregate) | IS 6461-2:1972 |
| 86 | Glossary of terms relating to cement concrete, Part III: concrete reinforcement | IS 6461-3:1972 |
| 87 | Glossary of terms relating to cement concrete, Part 4: Types of Concrete | IS 6461-4:1972 |
| 88 | Glossary of terms relating to cement concrete, Part 5: Formwork for concrete | IS 6461-5:1972 |
| 89 | Glossary of terms relating to cement concrete, Part 6: Equipment, tools and plant | IS 6461-6:1972 |
| 90 | Glossary of Terms Relating to Cement Concrete, Part 7: Mixing, Laying, Compaction, Curing and Other Construction Aspects | IS 6461-7:1973 |
| 91 | Glossary of terms relating to cement concrete, Part 8: Properties of concrete | IS 6461-8:1973 |
| 92 | Glossary of terms relating to cement concrete, Part 9: Structural aspects | IS 6461-9:1973 |
| 93 | Glossary of Terms Relating to Cement Concrete, Part 10: Tests and Testing Apparatus | IS 6461-10:1973 |
| 94 | Glossary of terms relating to cement concrete, Part 11: Prestressed concrete | IS 6461-11:1973 |
| 95 | Glossary of terms relating to cement concrete, Part 12: Miscellaneous | IS 6461-12:1973 |
| 96 | Specification for Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures | IS 6925:1973 |
| 97 | Recommendations for the use of table vibrators for consolidating concrete | IS 7246:1974 |
| 98 | Specification for concrete slump test apparatus | IS 7320:1974 |
| 99 | Specification for apparatus for determining constituents of fresh concrete | IS 7325:1974 |
| 100 | Method of test for determining the setting time of concrete by penetration resistance | IS 8142:1976 |
| 101 | Method of making, curing and determining compressive strength of accelerated cured concrete test specimens | IS 9013:1978 |
| 102 | Specification for Concrete Admixtures | IS 9103:1999 |
| 103 | Specification for Artificial Lightweight Aggregates for Concrete Masonry Units | IS 9142:1974 |
| 104 | Method of test for abrasion resistance of concrete | IS 9284:1979 |
| 105 | Specification for apparatus for flexural testing of concrete | IS 9399:1979 |
| 106 | Specification for apparatus for use in measurement of length change of hardened cement paste, mortar and concrete | IS 9459:1980 |
| 107 | Specification for pressure meter for determination of air content of freshly mixed concrete | IS 9799:1981 |
| 108 | Specification for cylindrical metal measures for use in tests of aggregates and concrete | IS 10079:1982 |
| 109 | Specification for moulds for use in tests of cement and concrete | IS 10086:1982 |
| 110 | Guidelines for concrete mix design proportioning | IS 10262:2009 |
| 111 | Code of practice for the use of screed board concrete vibrators | IS 11993:1987 |
| 112 | General requirements for pan mixers for concrete | IS 12119:1987 |
| 113 | Guidelines for falsework for concrete structures | IS 14687:1999 |
| 114 | Requirements for compression testing machine used for testing of concrete and mortar | IS 14858:2000 |
| 115 | Method of Test determination of water-soluble and acid-soluble chlorides in mortar and concrete, Part 1: Fresh mortar and concrete | IS 14959-1:2001 |
| 116 | Method of Test determination of water-soluble and acid-soluble chlorides in mortar and concrete, Part 2: Hardened mortar and concrete | IS 14959-2:2001 |
| 117 | Design Aids for Reinforced Concrete to IS 456:1978 | SP 16:1980 |
| 118 | Handbook on Concrete Mixes | SP 23:1982 |
| 119 | Explanatory Handbook on Indian Standard Code of Practice for Plain and Reinforced Concrete (IS 456:1978) | SP 24:1983 |
| 120 | Handbook on Concrete Reinforcement and Detailing | SP 34:1984 |
| S.N | Code Book Used (Description) | IS Code number ( With Download link ) |
|---|---|---|
| 121 | General Construction In Steel – Code of Practice | IS 800:2007 |
| 122 | Code of Practice for Use of Cold-Formed Light Gauge Steel Structural Members In General Building Construction | IS 801:1975 |
| 123 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 1 Materials, Loads and Permissible Stresses, Section 1: Materials and Loads | IS 802-1-1:1995 |
| 124 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 1: Material, Loads and Permissible Stress, Section 2: Permissible Stress | IS 802-1-2:1992 |
| 125 | Code of Practice for Use of Structural Steel in Overhead Transmission Line Towers, Part 2: Fabrication, Galvanizing, Inspection and Packing | IS 802-2:1978 |
| 126 | Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing | IS 802-3:1978 |
| 127 | Code of Practice for Design Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks | IS 803:1946 |
| 128 | Rectangular Pressed Steel Tanks – | IS 804:1967 |
| 129 | Code of Practice for Use of Steel in Gravity Water Tanks | IS 805:1968 |
| 130 | Code of Practice for Use of Steel Tubes In General Building Construction | IS 806:1968 |
| 131 | Dimensions for Hot Rolled Steel Beam, Column, Channel and Angle Sections | IS 808:1989 |
| 132 | Cold Formed Light Gauge Structural Steel Sections – | IS 811:1987 |
| 133 | Hot rolled and slit steel tee bars | IS 1173:1978 |
| 134 | Hot rolled steel bulb angles Dimensions | IS 1252:1991 |
| 135 | Dimensions for steel plates, sheets strips and flats for general engineering purposes | IS 1730:1989 |
| 136 | Steel Bars are round and square for structural and general engineering purposes | IS 1732:1989 |
| 137 | Rolling and cutting tolerances for hot rolled steel products | IS 1852:1985 |
| 138 | rolled steel bulb flats | IS 1863:1979 |
| 139 | Hot-rolled steel L-sections for shipbuilding | IS 1864:1979 |
| 140 | Steel Sheet Piling Sections | IS 2314:1986 |
| 141 | Tubular Steel Poles for Overhead Power Lines | IS 2713-1to3:1980 |
| 142 | Steel Scaffoldings | IS 2750:1964 |
| 143 | Crane rail sections | IS 3443:1980 |
| 144 | Aluminium equal leg angles | IS 3908:1986 |
| 145 | Aluminium Unequal Leg Angles | IS 3909:1986 |
| 146 | Aluminium channels | IS 3921:1985 |
| 147 | Hot Rolled Steel Channel Sections for General Engineering Purposes – Dimensions | IS 3954:1991 |
| 148 | Light rails | IS 3964:1980 |
| 149 | Code of practice for high-strength bolts in steel structures | IS 4000:1992 |
| 150 | Code of practice for steel tubular scaffolding, Part 1: Definitions and materials | IS 4014-1:1967 |
| 151 | Aluminium I-beam | IS 5384:1985 |
| 152 | Dimensions and dimensional tolerances for hot rolled steel plates for the ship’s hull structure | IS 5488:1987 |
| 153 | Aluminium tee-sections | IS 6445:1985 |
| 154 | Aluminium bulb angles for marine application | IS 6449:1987 |
| 155 | Aluminium tee bars for marine application | IS 6475:1987 |
| 156 | Aluminium bulb plates for marine application | IS 6476:1987 |
| 157 | Code of practice for design and construction of steel chimneys, Part 1: Mechanical aspects | IS 6533-1:1989 |
| 158 | Code of practice for design and construction of steel chimneys, Part 2: Structural aspects | IS 6533-2:1989 |
| 159 | Safety code for the erection of Structural Steelwork | IS 7205:1974 |
| 160 | Tolerances for fabrication of steel structures | IS 7215:1974 |
| 161 | Specification for hot-rolled steel sections for doors, windows and ventilators | IS 7452:1990 |
| 162 | slotted sections | IS 8081:1976 |
| 163 | Code of Practice for the use of Aluminium Alloys in Structures | IS 8147:1976 |
| 164 | Recommendations for dimensional parameters for industrial building | IS 8640:1977 |
| 165 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 1: General Requirements and Assessment of Loads | IS 9178-1:1979 |
| 166 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 2: Design Criteria | IS 9178-2:1979 |
| 167 | Criteria for Design of Steel Bins for Storage of Bulk Materials, Part 3: Bins Designed for Mass Flow and Funnel Flow | IS 9178-3:1980 |
| 168 | Recommendations for maintenance and operation of petroleum storage tanks, Part 1: Preparation of tanks for safe entry and work | IS 9964-1:1981 |
| 169 | Recommendations for Maintenance and Operation of Petroleum Storage Tanks, Part 2: Inspection | IS 9964-2:1981 |
| 170 | Dimensions and Tolerances for Hot Rolled Track Shoe Sections, Part I: Section TS-L1 | IS 10182-1:1982 |
| 171 | Dimensions and tolerances for hot-rolled track shoe sections, Part 2: Section TS-H1 | IS 10182-2:1985 |
| 172 | Code of practice for design, fabrication, testing and installation of underground/above-ground horizontal cylindrical storage tanks for petroleum products | IS 10787:1992 |
| 173 | Hot Rolled Parallel Flange Steel Sections for Beams, Columns and Bearing Piles – Dimensions and Section Properties | IS 12778:2004 |
| 174 | Rolling and cutting tolerances for hot rolled parallel flange beam and column sections | IS 12779:1989 |
| 175 | Tolerances for the erection of steel structures | IS 12843:1989 |
| 176 | Design and installation of natural gas pipelines – Code of Practice, Part 1: Laying of pipelines | IS 15663-1:2006 |
| 177 | Design and installation of natural gas pipelines – Code of Practice, Part 2: Laying of pipelines in crossings | IS 15663-2:2006 |
| 178 | Design and installation of natural gas pipelines – Code of Practice: Part 3 Pre-commissioning and commissioning of pipelines | IS 15663-3:2006 |
| 179 | ISI Handbook for Structural Engineers -Part- 1 Structural Steel Sections | SP 6-1:1964 |
| 180 | ISI Handbook for Structural Engineers -Part- 2 Steal Beams and Plate Girders | SP 6-2:1962 |
| 181 | ISI Handbook for Structural Engineers -Part- 3 Steel Columns and Struts | SP 6-3:1962 |
| 182 | ISI Handbook for Structural Engineers -Part- 4 Use of High Strength Friction Grip Bolts | SP 6-4:1969 |
| 183 | Handbook for Structural Engineers -Part- 5 Cold-Formed, Light-Gauge Steel Structures | SP 6-5:1980 |
| 184 | Handbook for Structural Engineers -Part- 6 Application of Plastic Theory In Design of Steel Structures | SP 6-6:1972 |
| 185 | Handbook for Structural Engineers -Part- 7: Simple Welded Girders | SP 6-7:1972 |
| SI.N | Code Book Used (Description) | IS Code number ( With Download link ) |
|---|---|---|
| 186 | Specification for Building Limes | IS 712:1984 |
| 187 | Method of field testing of building lime | IS 1624:1986 |
| 188 | Code of practice for field slaking of building lime and preparation of putty | IS 1635:1992 |
| 189 | Design and installation of vertical mixed-feed lime kiln guide, Part 1: Limestone, Section 1: Masonry-type shaft | IS 1849-1-1:1990 |
| 190 | Design and installation of vertical mixed feed type lime kiln guide, Part 1: For limestone, Section 2: RCC type shaft | IS 1849-1-2:1991 |
| 191 | Guide for the manufacture of lime in vertical mixed-feed type kiln, Part 1: From lime-stone | IS 1861-1:1990 |
| 192 | Gypsum Plaster Boards, Part 1: Plain Gypsum Plaster Boards | IS 2095-1:2011 |
| 193 | Gypsum Plaster Boards, Part 2: Coated/Laminated Gypsum Plaster Boards | IS 2095-2:2001 |
| 194 | gypsum plaster boards, Part 3: Reinforced Gypsum plasterboards | IS 2095-3:1996 |
| 195 | Glossary of terms relating to gypsum | IS 2469:1976 |
| 196 | Code of practice for preparation and use of lime concrete | IS 2541:1991 |
| 197 | gypsum building plaster, Part 1: Excluding premixed lightweight plaster | IS 2547-1:1976 |
| 198 | gypsum building plaster, Part 2: Premixed lightweight plaster | IS 2547-2:1976 |
| 199 | Cinder as Fine Aggregates for use in Lime Concrete | IS 2686:1977 |
| 200 | non-load bearing gypsum partition blocks (solid and hollow types) | IS 2849:1983 |
| 201 | broken brick (burnt clay) coarse aggregates for use in lime concrete | IS 3068:1986 |
| 202 | lime based blocks | IS 3115:1992 |
| 203 | broken brick (burnt clay) fine aggregates for use in lime mortar | IS 3182:1986 |
| 204 | lime-pozzolana mixture | IS 4098:1983 |
| 205 | calcium silicate bricks | IS 4139:1989 |
| 206 | Code of practice for preparation and use of lime-pozzolana mixture concrete in buildings and roads | IS 5817:1992 |
| 207 | Glossary of terms relating to building lime | IS 6508:1988 |
| 208 | Method of test for building limes, Part 1: Determination of insoluble residue, loss on ignition, insoluble matter, silicon dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide | IS 6932-1:1973 |
| 209 | Method of test for building limes Determination of carbon dioxide content | IS 6932-2:1973 |
| 210 | Method of test for building limes Determination of residue on slaking of quicklime | IS 6932-3:1973 |
| 211 | Method of test for building limes Determination of fineness of hydrated lime | IS 6932-4:1973 |
| 212 | Method of test for building limes Determination of un hydrated oxide, Part v: Determination of un hydrated oxide | IS 6932-5:1973 |
| 213 | Method of test for building limes, Part VI: Determination of volume yield of quicklime | IS 6932-6:1973 |
| 214 | Method of test for building limes, Part VII: Determination of compressive and transverse strength | IS 6932-7:1973 |
| 215 | Method of test for building limes, Part VIII: Determination of workability | IS 6932-8:1973 |
| 216 | Method of test for building limes Determination of soundness | IS 6932-9:1973 |
| 217 | Methods of Tests for Building Limes, Part X: Determination of Popping and Pitting of Hydrated Lime | IS 6932-10:1973 |
| 218 | Methods of Tests for Building Limes, Part 11: Determination of Setting Time of Hydrated Lime | IS 6932-11:1983 |
| 219 | gypsum plaster for use in the manufacture of fibrous plaster boards | IS 8272:1984 |
| 220 | inorganic aggregates for use in gypsum plaster | IS 9498:1980 |
| 221 | Code of practice for the manufacture of lime-based blocks | IS 10049:1981 |
| 222 | Code of practice for manufacture and use of lime-pozzolana concrete blocks for paving | IS 10359:1982 |
| 223 | lime-pozzolana concrete blocks for paving | IS 10360:1982 |
| 224 | quick setting lime pozzolana mixture | IS 10772:1983 |
| 225 | Low-grade gypsum use in the building industry-code of practice | IS 12654:1989 |
| 226 | By-product gypsum for use in plaster, blocks and boards | IS 12679:1989 |
| 227 | Pulverized Fuel Ash-Lime Bricks | IS 12894:2002 |
| 228 | Guidelines for the manufacture of gypsum plaster in Mechanized pan system | IS 13001:1991 |
| 229 | Guidelines for handling and storage of building limes | IS 14401:1996 |
| 230 | Guidelines on Fuel Saving in Vertical Mixed-feed Lime Shaft Kilns | IS 1486:2000 |
| 231 | Pulverized fuel ash for lime-pozzolana mixture applications. | IS 15648:2006 |
| 232 | Methods of Test for Gypsum Plaster, Concrete and Products, Part I: Plaster and Concrete | IS 2542-1-1To12:1978 |
| 233 | Methods of Test for Gypsum Plaster, Concrete and Products, Part II: Gypsum Products | IS 2542-2-1To8:1981 |
| SI.N | Code book used (Description) | IS Code number |
|---|---|---|
| 234 | Design of Structural Timber In Building -Code of Practice | IS 833:1994 |
| 235 | Equivalent Metric Units For Scales Dimensions And Quantities In General Construction Work | IS 965:1963 |
| 236 | Code of practice for fixing wall coverings | IS 1414:1989 |
| 237 | Code of Practice for Painting of Ferrous Metals in Buildings, Part 1: Pretreatment | IS 1414-1:1971 |
| 238 | Code of practice for the painting of ferrous metals in buildings, Part 2: Painting | IS 1414-2:1971 |
| 239 | Construction of Stone Masonry – Code of Practice, Part 1: Rubble Stone Masonry | IS 1597-1:1992 |
| 240 | Code of practice for construction of stone masonry, Part 2: Ashlar masonry | IS 1597-2:1992 |
| 241 | Code of practice for design and construction of wood stairs for houses | IS 1634:1992 |
| 242 | Code of practice for design and construction of flues and chimneys for domestic heating appliances | IS 1649:1962 |
| 243 | Hot Applied Sealing Compounds for Joints in Concrete- Specification | IS 1834:1984 |
| 244 | preformed fillers for expansion joints in concrete pavement and structures (non-extruding and resilient type): Part 1 Bitumen impregnated fibre – Specification | IS 1838-1:1983 |
| 245 | preformed fillers for expansion joints in concrete pavement and structure (non-extruding and resilient type) Part 2 CNSL Aldehyde resin and coconut pith – Specification | IS 1838-2:1984 |
| 246 | Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based | IS 1838-3:2011 |
| 247 | Code of Practice for Structural Use of Unreinforced Masonry | IS 1905:1987 |
| 248 | Code of practice for use of fixing devices in walls, ceilings and floors of solid construction | IS 1946:1961 |
| 249 | Code of practice for in-situ construction of walls, in buildings with soil-cement | IS 2110:1980 |
| 250 | Code of practice for flat-roof finish: mud phuska | IS 2115:1980 |
| 251 | Sand for masonry mortars – Specification | IS 2116:1980 |
| 252 | Code of Practice for Construction of Jack-Arch Type of Bult-up Floor or Roof | IS 2118:1980 |
| 253 | Code of practice for construction of brick-cum-concrete composite (madras terrace) floor and roof | IS 2119:1980 |
| 254 | Code of practice for construction of reinforced concrete shell roof | IS 2204:1962 |
| 255 | Code of practice for brickworks | IS 2212:1991 |
| 256 | Code of Practice for Preparation and Use of Masonry Mortars | IS 2250:1981 |
| 257 | Code of practice for finishing of wood and wood-based materials, Part 1: Operations and workmanship | IS 2338-1:1967 |
| 258 | Code of practice for finishing wood and wood-based materials, Part 2: Schedules | IS 2338-2:1967 |
| 259 | Code of practice for nail-jointed timber construction | IS 2366:1983 |
| 260 | Painting of Concrete, Masonry and Plaster Surfaces – Code of Practice, Part 1: Operations and Workmanship | IS 2395-1:1994 |
| 261 | Code of practice for painting concrete, masonry and plaster surfaces, Part 2: Schedules | IS 2395-2:1994 |
| 262 | Code of practice for fixing ceiling covering | IS 2441:1984 |
| 263 | Code of practice for the painting of nonferrous metals in buildings, Part 1: Pretreatment | IS 2524-1:1968 |
| 264 | Code of practice for the painting of non-ferrous metals in buildings, Part 2: Painting | IS 2524-2:1968 |
| 265 | Code of practice for fixing rainwater gutters and downpipes for roof drainage | IS 2527:1984 |
| 266 | Code of practice for roofing with wooden shingles | IS 2700:1987 |
| 267 | Code of practice for design and construction of stone slab over joist floor | IS 2792:1964 |
| 268 | Code of practice for roofing with Mangalore tiles | IS 2858:1984 |
| 269 | Code of practice for painting asbestos cement building products | IS 3140:1965 |
| 270 | Code of Practice for Design and Installation of Joints in Buildings | IS 3414:1968 |
| 271 | Code of Practice for Glazing in Buildings | IS 3548:1988 |
| 272 | structural timber in the building – Specification | IS 3629:1986 |
| 273 | Construction of Non-load Bearing Gypsum Block Partitions – Code of Practice | IS 3630:1992 |
| 274 | Code of practice for construction of timber floors | IS 3670:1989 |
| 275 | Code of practice for external facings and veneers, Part I: Stone facing | IS 4101-1:1967 |
| 276 | Code of Practice for External Facings and Veneers, Part II: Cement Concrete Facing | IS 4101-2:1967 |
| 277 | Code of Practice for External Cladding, Part 3: Wall Tiling and Mosaics | IS 4101-3:1985 |
| 278 | Code of practice for reed walling | IS 4407:1967 |
| 279 | Code of practice for finishing wood and wood-based products with nitrocellulose and cold-catalyzed materials | IS 4597:1968 |
| 280 | preferred cut sizes of structural timber – Specification | IS 4891:1988 |
| 281 | Glossary of terms applicable to roof coverings | IS 4920:1968 |
| 282 | Method of test for nail-jointed timber trusses, Part I: Destructive test | IS 4924-1:1968 |
| 283 | Method of Test for Nail-jointed Timber Trusses, Part II: Proof Test | IS 4924-2:1968 |
| 284 | Code of Practice for Design and Construction of Nailed Laminated Timber Beams | IS 4983:1968 |
| 285 | Code of Practice for Laying and Fixing of Sloped Roof Covering, Part I: Slating | IS 5119-1:1968 |
| 286 | Code of practice for laying hardwood parquet and wood block floors | IS 5389:1969 |
| 287 | Code of practice for construction of timber ceilings | IS 5390:1984 |
| 288 | Methods of test for clear finishes for wooden furniture, Part 1: Resistance to dry heat | IS 5807-1:1975 |
| 289 | Methods of test for clear finishes for wooden furniture, Part 2: Resistance to wet heat | IS 5807-2:1975 |
| 290 | Methods of test for clear finishes for wooden furniture, Part 3: Resistance to marking by oils and fats | IS 5807-3:1971 |
| 291 | Methods of test for clear finishes for wooden furniture, Part 4: Resistance to marking by liquids | IS 5807-4:1975 |
| 292 | Methods of test for clear finishes for wooden furniture, Part 5: Test for low-angle glare | IS 5807-5:1975 |
| 293 | Methods of Test for Clear Finishes for Wooden Furniture, Part VI: Resistance to Mechanical Damage | IS 5807-6:1978 |
| 294 | Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part 1: With Hollow Concrete Filler Blocks | IS 6061-1:1971 |
| 295 | Code of practice for construction of floor and roof with joists and filler blocks, Part 2: With hollow clay filler blocks | IS 6061-2:1981 |
| 296 | Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part 3: With Precast Hollow Clay Block Joists and Hollow Clay Filler Blocks | IS 6061-3:1981 |
| 297 | Code of Practice for Construction of Floor and Roof with Joists and Filler Blocks, Part IV: With Precast Hollow Clay Block Slab Panels | IS 6061-4:1981 |
| 298 | Code of practice for anti-termite measures in buildings, Part 1: Constructional measures | IS 6313-1:1981 |
| 299 | Code of Practice for Anti-Termite Measures in Buildings, Part 2: Pre-constructional Chemical Treatment Measures | IS 6313-2:2001 |
| 300 | Code of Practice for Anti-termite Measures in Buildings, Part 3: Treatment for Existing Buildings | IS 6313-3:2001 |
| 301 | Code of practice for construction of floors and roofs using precast doubly-curved shell units | IS 6332:1984 |
| 302 | Code of practice for installation of joints in concrete pavements | IS 6509:1985 |
| 303 | Code of practice for design, fabrication and maintenance of nail-jointed timber posts from small dimensional timber for overhead electric distribution lines for low voltage | IS 7683:1975 |
| 304 | Code of practice for laying mosaic parquet flooring | IS 9472:1980 |
| 305 | Pictorial Surface Preparation Standards for Painting of Steel Surfaces | IS 9954:1981 |
| 306 | Corrugated coir wood wool cement roofing sheets-Specification | IS 10388:1982 |
| 307 | Code of practice for patent glazing | IS 10439:1983 |
| 308 | Code of practice for construction of RB and RBC floors and roofs | IS 10440:1983 |
| 309 | Methods of test for preformed fillers for expansion joints in concrete paving and structural construction | IS 10566:1983 |
| 310 | Joints in Buildings – Vocabulary | IS 10957:1999 |
| 311 | A general checklist of functions of joints in building (ISO 3447-1975) | IS 10958:1984 |
| 312 | Glossary of terms for sealants for building purposes (ISO 6927-1981) | IS 10959:1984 |
| 313 | Code of practice for design and construction of bolt-jointed timber construction | IS 11096:1984 |
| 314 | Code of practice for setting out of buildings | IS 11134:1984 |
| 315 | Specification for one part gun-grade polysulphide-based joints sealants, Part 1: General requirements | IS 11433-1:1985 |
| 316 | Specification for one part gun-grade polysulphide-based joint sealants, Part 2: Methods of test | IS 11433-2:1986 |
| 317 | Classification of joints in buildings for the accommodation of dimensional deviations during construction (ISO 7727-1984) | IS 11817:1986 |
| 318 | Method of test for laboratory determination of air permeability of joints in buildings | IS 11818:1986 |
| 319 | Code of practice for laying and fixing sloped roof coverings using plain and corrugated galvanized steel sheets | IS 12093:1987 |
| 320 | Two-part polysulphide-based sealants – Specification, Part 1: General requirements | IS 12118-1:1987 |
| 321 | Two parts polysulphide based sealants – Specification, Part 2: Methods of test | IS 12118-2:1987 |
| 322 | Code of Practice for Improved Thatching of Roof with Rot and Fire Retardant Treatment | IS 12506:1988 |
| 323 | Code of practice for no-fines cast in situ cement concrete | IS 12727:1989 |
| 324 | Guide for preparation and use of mud mortar in masonry | IS 13077:1991 |
| 325 | Guidelines for painting structures in an aggressive chemical environment | IS 14428:1997 |
| 326 | Guidelines for Maintenance Management of Buildings, Part 1: General | IS 15183-1:2002 |
| 327 | Guidelines for Maintenance Management of Buildings, Part 2: Finance | IS 15183-2:2002 |
| 328 | Guidelines for Maintenance Management of Buildings, Part 3: Labour | IS 15183-3:2002 |
| 329 | Installation of Frameless Door and Window Shutters – Code of Practice | IS 15345:2003 |
| 330 | Handbook on Masonry Design and Construction | SP 20:1991 |
| 331 | Summaries of Indian Standards for Building Materials | SP 21:2005 |
| 332 | Handbook on Causes and Prevention of Cracks in Building | SP 25:1984 |
| 333 | Handbook on Building Construction Practices (Excluding Electrical Work) | SP 62:1997 |
| 334 | Standard colours for building and decorative finishes (with supplement) | SP 1650:1973 |
| 335 | Standard colours for building and decorative finishes- supplement ONLY | SP 1650:1973 |
| SI.N | Code book used (Description) | IS Code number |
|---|---|---|
| 336 | Timber Panelled and Glazed Shutters, Part 1: Door shutters | IS 1003-1:2003 |
| 337 | Timber Panelled And Glazed Shutters, Part 2: Windows and Ventilator Shutters | IS 1003-2:1994 |
| 338 | Specification For Steel Doors, Windows And Ventilators | IS 1038:1983 |
| 339 | Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators | IS 1081:1960 |
| 340 | Specification for steel windows for industrial buildings | IS 1361:1978 |
| 341 | Specification for aluminium doors, windows and ventilators | IS 1948:1961 |
| 342 | Specification for Aluminium Windows for Industrial Buildings | IS 1949:1961 |
| 343 | Wooden Flush Door Shutters (Cellular and Hollow Core Type), Part 1: Plywood Face Panels | IS 2191-1:1983 |
| 344 | wooden flush door shutters (cellular and hollow core type): Part 2 Particle board and hardboard face panels | IS 2191-2:1983 |
| 345 | wooden flush door shutters (solid core type): Part 1 Plywood face panels | IS 2202-1:1989 |
| 346 | wooden flush door shutters (solid core type): Part 2 Particle board and hardboard face panels | IS 2202-2:1983 |
| 347 | Door Shutters – Methods of Tests | IS 4020-1to16:1998 |
| 348 | Timber Door, Window and Ventilator Frames | IS 4021:1995 |
| 349 | Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors, Windows and Shutters | IS 4043:1969 |
| 350 | Steel Door Frames | IS 4351:2003 |
| 351 | Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows | IS 4913:1968 |
| 352 | ledged braced and battened timber door shutters | IS 6198:1992 |
| 353 | Metal Rolling Shutters and Rolling Grills | IS 6248:1979 |
| 354 | Glossary of terms relating to doors | IS 10428:1983 |
| 355 | steel sliding shutters (top hung type) | IS 10451:1983 |
| 356 | collapsible gates | IS 10521:1983 |
| 357 | Glass Fibre Reinforced Plastic (GRP) Panel Type Door Shutters for Internal Use | IS 14856:2000 |
| 358 | Moulded Raised High-Density Fibre (HDF) Panel Doors | IS 15380:2003 |
| 336 | Timber Panelled and Glazed Shutters, Part 1: Door shutters | IS 1003-1:2003 |
| 337 | Timber Panelled And Glazed Shutters, Part 2: Windows and Ventilator Shutters | IS 1003-2:1994 |
| 338 | Specification For Steel Doors, Windows And Ventilators | IS 1038:1983 |
| 339 | Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators | IS 1081:1960 |
| 340 | Specification for steel windows for industrial buildings | IS 1361:1978 |
| 341 | Specification for aluminium doors, windows and ventilators | IS 1948:1961 |
| 342 | Specification for Aluminium Windows for Industrial Buildings | IS 1949:1961 |
| 343 | Wooden Flush Door Shutters (Cellular and Hollow Core Type), Part 1: Plywood Face Panels | IS 2191-1:1983 |
| 344 | wooden flush door shutters (cellular and hollow core type): Part 2 Particle board and hardboard face panels | IS 2191-2:1983 |
| 345 | wooden flush door shutters (solid core type): Part 1 Plywood face panels | IS 2202-1:1989 |
| 346 | wooden flush door shutters (solid core type): Part 2 Particle board and hardboard face panels | IS 2202-2:1983 |
| 347 | Door Shutters – Methods of Tests | IS 4020-1to16:1998 |
| 348 | Timber Door, Window and Ventilator Frames | IS 4021:1995 |
| 349 | Recommendations for Symbolic Designation of Direction of Closing and Faces of Doors, Windows and Shutters | IS 4043:1969 |
| 350 | Steel Door Frames | IS 4351:2003 |
| 351 | Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows | IS 4913:1968 |
| 352 | ledged braced and battened timber door shutters | IS 6198:1992 |
| 353 | Metal Rolling Shutters and Rolling Grills | IS 6248:1979 |
| 354 | Glossary of terms relating to doors | IS 10428:1983 |
| 355 | steel sliding shutters (top hung type) | IS 10451:1983 |
| 356 | collapsible gates | IS 10521:1983 |
| 357 | Glass Fibre Reinforced Plastic (GRP) Panel Type Door Shutters for Internal Use | IS 14856:2000 |
| 358 | Moulded Raised High-Density Fibre (HDF) Panel Doors | IS 15380:2003 |
| 359 | Route Marker Signs for National Highways | IRC 002:1968 |
| 360 | Dimensions and Weights of Road Design Vehicles | IRC 003:1983 |
| 361 | Standard Specifications and Code of Practice for Road Bridges, Section I (General Features of Design) (Seventh Revision) | IRC 005:1998 |
| 362 | Standard Specifications and Code of Practice for Road Bridges, Section I (General Features of Design) (Eighth Revision) | IRC 005:2015 |
| 363 | Standard Specifications and Code of Practice for Road Bridges, Section II — Loads and Stresses (Fourth Revision) | IRC 006:2014 |
| 364 | Standard Specifications and Code of Practice for Road Bridges, Section-II Loads and Load Combinations (Seventh Revision) | IRC 006:2017 |
| 365 | Recommended Practice for Numbering Bridges and Culverts | IRC 007:1971 |
| 366 | Recommended Practice for Numbering Culverts, Bridges and Tunnels (Second Revision) | IRC 007:2017 |
| 367 | Traffic Census on Non-Urban Roads | IRC 009:1972 |
| 368 | Recommended Practice for the Design and Layout of Cycle Tracks | IRC 011:1962 |
| 369 | Recommended Practice for the Design and Layout of Cycle Tracks (First Revision) | IRC 011:2015 |
| 370 | Guidelines for Access, Location and Layout of Roadside Fuel Stations and Service Stations (Third Revision) | IRC 012:2009 |
| 371 | Recommended Practice for Open-Graded Premix Carpet (Third Revision) | IRC 014:2004 |
| 372 | Standard Specifications and Code of Practice for Construction of Concrete Roads (Fourth Revision) | IRC 015:2011 |
| 373 | Code of Practice for Construction of Jointed Plain Concrete Pavements (Fifth Revision) | IRC 015:2017 |
| 374 | Standard Specifications and Code of Practice for Prime and Tack Coat (Second Revision) | IRC 016:2004 |
| 375 | Standard Specifications and Code of Practice for Prime and Tack Coat (Second Revision) | IRC 016:2008 |
| 376 | Tentative Specification for Single Coat Bituminous Surface Dressing | IRC 017:1965 |
| 377 | Criteria for Prestressed Concrete Road Bridges (Post-Tensioned Concrete) (Second Revision) | IRC 018:1995 |
| 378 | Design Criteria for Prestressed Concrete Road Bridges (Post-Tensioned Concrete) (Third Revision) | IRC 018:2000 |
| 379 | Standard Specifications and Code of Practice for Water-Bound Macadam | IRC 019:2005 |
| 380 | Recommended Practice for Bituminous Penetration Macadam (Full Grout) | IRC 020:1966 |
| 381 | Standard Specifications and Code of Practice for Road Bridges, Section III: Cement Concrete (Plain and Reinforced) (Third Revision) | IRC 021:2000 |
| 382 | Standard Specifications and Code of Practice for Road Bridges, Section VI — Composite Construction (Limit States Design) (Third Revision) | IRC 022:2014 |
| 383 | Tentative Specification for Two Coat Bituminous Surface Dressing | IRC 023:1966 |
| 384 | Standard Specifications and Code of Practice for Road Bridges, Steel Road Bridges (Limit State Method) (Third Revision) | IRC 024:2010 |
| 385 | Type Designs for Boundary Stones | IRC 025:1967 |
| 386 | Type Design for 200-Metre Stones | IRC 026:1967 |
| 387 | Specifications for Bituminous Macadam (First Revision) | IRC 027:2009 |
| 388 | Tentative Specifications for the Construction of Stabilized Soil Roads with Soft Aggregate in Areas of Moderate and High Rainfall | IRC 028:1967 |
| 389 | Specification for Bituminous Concrete (Asphaltic Concrete) for Road Pavement (First Revision) | IRC 029:1988 |
| 390 | Standard Letters and Numerals of Different Heights for Use on Highway Signs | IRC 030:1968 |
| 391 | Route Marker Signs for State Routes | IRC 031:1969 |
| 392 | Standard for Vertical and Horizontal Clearances of Overhead Electric Power and Telecommunication Lines as Related to Roads | IRC 032:1969 |
| 393 | Standard Procedure for Evaluation and Condition Surveys of Stabilised Soil Roads | IRC 033:1969 |
| 394 | Recommendations for Road Construction in Areas Affected by Water Logging, Flooding and/or Salts Infestation | IRC 034:2011 |
| 395 | Code of Practice for Road Markings (Second Revision) | IRC 035:2015 |
| 396 | Recommended Practice for Construction of Earth Embankments and Sub-Grade for Road Works (First Revision) | IRC 036:2010 |
| 397 | Tentative Guidelines for the Design of Flexible Pavements | IRC 037:2012 |
| 398 | Guidelines for the Design of Flexible Pavements (Fourth Revision) (without the CD) | IRC 037:2019 |
| 399 | Guidelines for Design of Horizontal Curves for Highways and Design Tables (First Revision) | IRC 038:1988 |
| 400 | Standards for Road-Rail Level Crossings (First Revision) | IRC 039:1986 |
| 401 | Standard Specifications and Code of Practice for Road Bridges, Section IV (Brick, Stone and Cement Concrete Block Masonry) (Second Revision) | IRC 040:2002 |
| 402 | Guidelines for Type Designs for Check Barriers (First Revision) | IRC 041:1997 |
| 403 | Proforma for Record of Test Values of Locally Available Pavement Construction Materials | IRC 042:1972 |
| 404 | Recommended Practice for Tools, Equipment and Appliances for Concrete Pavement Construction | IRC 043:1972 |
| 405 | Recommended Practice for Plants, Tools and Equipment Required for Construction and Maintenance of Concrete Roads (First Revision) | IRC 043:2015 |
| 406 | Guidelines for Cement Concrete Mix Design for Pavements (Third Revision) | IRC 044:2017 |
| 407 | Recommendations for Estimating the Resistance of Soil Below the Maximum Scour Level in the Design of Well Foundations of Bridges | IRC 045:1972 |
| 408 | A Policy on Roadside Advertisements (First Revision) | IRC 046:1972 |
| 409 | Tentative Specification for Built-Up Spray Grout | IRC 047:1972 |
| 410 | Tentative Specification for Bituminous Surface Dressing Using Precoat Aggregates | IRC 048:1972 |
| 411 | Recommended Practice for the Pulverization of Black Cotton Soils for Lime Stabilisation | IRC 049:1973 |
| 412 | Recommended Design Criteria for the Use of Cement-Modified Soil in Road Construction | IRC 050:1973 |
| 413 | Guidelines for the Use of Soil-Lime Mixes in Road Construction (First Revision) | IRC 051:1992 |
| 414 | Guidelines for the Alignment Survey and Geometric Design of Hill Roads (Third Revision) | IRC 052:2011 |
| 415 | Road Accident Recording Forms A-1 and A-4 (Second Revision) | IRC 053:2012 |
| 416 | Lateral and Vertical Clearances at Underpasses for Vehicular Traffic | IRC 054:1974 |
| 417 | Recommended Practice for Sand-Bitumen Base Courses | IRC 055:1974 |
| 418 | Recommended Practice for Treatment of Embankment and Roadside Slopes for Erosion Control (First Revision) | IRC 056:2011 |
| 419 | Recommended Practice for Sealing of Joints in Concrete Pavements (Second Revision) | IRC 057:2018 |
| 420 | Guidelines for the Design of Plain Jointed Rigid Pavements for Highways (Fourth Revision) (without CD) | IRC 058:2015 |
| 421 | Tentative Guidelines for Design of Gap-Graded Cement Concrete Mixes for Road Pavements | IRC 059:1976 |
| 422 | Tentative Guidelines for the Use of Lime-Fly Ash Concrete as Pavement Base or Sub-Base | IRC 060:1976 |
| 423 | Tentative Guidelines for Construction of Cement Concrete Pavements in Hot Weather | IRC 061:1975 |
| 424 | Guidelines for Control of Access on Highways | IRC 062:1976 |
| 425 | Tentative Guidelines for the Use of Low-Grade Aggregates and Soil Aggregates Mixtures in Road Pavement Construction | IRC 063:1976 |
| 426 | Guidelines for Capacity of Roads in Rural Areas (First Revision) | IRC 064:1990 |
| 427 | Guidelines for Planning and Design of Roundabouts (First Revision) | IRC 065:2017 |
| 428 | Recommended Practice for Sight Distance on Rural Highways | IRC 066:1976 |
| 429 | Code of Practice for Road Signs (Third Revision) | IRC 067:2012 |
| 430 | Tentative Guidelines on Cement-Fly Ash Concrete for Rigid Pavement Construction | IRC 068:1976 |
| 431 | Space Standards for Roads in Urban Areas | IRC 069:1977 |
| 432 | Guidelines on Regulation and Control of Mixed Traffic in Urban Areas (First Revision) | IRC 070:2017 |
| 433 | Recommended Practice for Preparation of Notations | IRC 071:1977 |
| 434 | Recommended Practice for Use and Upkeep of Equipment, Tools and Appliances for Bituminous Pavement Construction | IRC 072:1978 |
| 435 | Geometric Design Standards for Rural (Non-Urban) Highways | IRC 073:1990 |
| 436 | Tentative Guidelines for Lean-Cement Concrete and Lean Cement-Fly Ash Concrete as a Pavement Base or Subbase | IRC 074:1979 |
| 437 | Guidelines for the Design of High Embankments (First Revision) | IRC 075:2015 |
| 438 | Tentative Guidelines for Structural Strength Evaluation of Rigid Airfield Pavements | IRC 076:1979 |
| 439 | Tentative Guidelines for Repair of Concrete Pavements Using Synthetic Resins | IRC 077:1979 |
| 440 | Standard Specifications and Code of Practice for Road Bridges, Section VII — Foundations and Substructure (Revised Revision) | IRC 078:2014 |
| 441 | Recommended Practice for Road Delineators (First Revision) | IRC 079:2019 |
| 442 | Type Designs for Pick-Up Bus Stops on Rural (i.e., Non-Urban) Highways | IRC 080:1981 |
| 443 | Guidelines for Strengthening of Flexible Road Pavements Using Benkelman Beam Deflection Technique (First Revision) | IRC 081:1997 |
| 444 | Code of Practice for Maintenance of Bituminous Surfaces of Highways | IRC 082:1982 |
| 445 | Code of Practice for Maintenance of Bituminous Road Surfaces (First Revision) (without CD) | IRC 082:2015 |
| 446 | Standard Specifications and Code of Practice for Road Bridges, Section IX (Bearings), Part I (Metallic Bearings) (First Revision) | IRC 083-1:1999 |
| 447 | Standard Specifications and Code of Practice for Road Bridges, Section IX — Bearings, Part I: Roller and Rocker Bearings (Second Revision) | IRC 083-1:2015 |
| 448 | Standard Specifications and Code of Practice for Road Bridges, Section IX (Bearings), Part II (Elastomeric Bearings) | IRC 083-2:1987 |
| 449 | Standard Specifications and Code of Practice for Road Bridges, Section IX — Bearings (Elastomeric Bearings), Part II (Second Revision) | IRC 083-2:2018 |
| 450 | Standard Specifications and Code of Practice for Road Bridges, Section IX (Bearings), Part III (Pot, Pot-Cum-PTEE, Pin and Metallic Guide Bearings) | IRC 083-3:2002 |
| 451 | Standard Specifications and Code of Practice for Road Bridges, Section IX — Bearings, Part III: POT, PIN, Metallic Guide and Plane Sliding Bearings (First Revision) | IRC 083-3:2018 |
| 452 | Standard Specifications and Code of Practice for Road Bridges, Section IX — Bearings, Part I: Metallic Bearings | IRC 083:2014 |
| 453 | Code of Practice for Curing of Cement Concrete Pavements | IRC 084:1983 |
| 454 | Recommended Practice for Accelerated Strength Testing and Evaluation of Concrete for Road and Airfield Constructions | IRC 085:1983 |
| 455 | Recommended Practice for Accelerated Strength Testing and Evaluation of Concrete (First Revision) | IRC 085:2015 |
| 456 | Geometric Design Standards for Urban Roads in Plains | IRC 086:1983 |
| 457 | Geometric Design Standards for Urban Roads and Streets (First Revision) | IRC 086:2018 |
| 458 | Guidelines for the Design and Erection of Formwork, Falsework and Temporary Structures (First Revision) | IRC 087:2011 |
| 459 | Guidelines for Formwork, Falsework and Temporary Structures for Road Bridges (Second Revision) | IRC 087:2018 |
| 460 | Recommended Practice for Lime Flyash Stabilised Soil Base/Sub-Base in Pavement Construction | IRC 088:1984 |
| 461 | Guidelines for Design and Construction of River Training and Control Works for Road Bridges (First Revision) | IRC 089:1997 |
| 462 | Guidelines for Design and Construction of River Training and Control Works for Road Bridges (Second Revision) | IRC 089:2019 |
| 463 | Guidelines of Selection, Operation and Maintenance of Bituminous Hot Mix Plant (First Revision) | IRC 090:2010 |
| 464 | Tentative Guidelines for Construction of Cement Concrete Pavements in Cold Weather | IRC 091:1985 |
| 465 | Guidelines for the Design of Interchanges in Urban Areas | IRC 092:1985 |
| 466 | Guidelines for the Design of Interchanges in Urban Areas (First Revision) | IRC 092:2017 |
| 467 | Guidelines on Design and Installation of Road Traffic Signals | IRC 093:1985 |
| 468 | Specification for Dense Bituminous Macadam | IRC 094:1986 |
| 469 | Specification for Semi-Dense Bituminous Concrete | IRC 095:1987 |
| 470 | Tentative Specification for Two-Coat Surface Dressing Using Cationic Bitumen Emulsion | IRC 096:1987 |
| 471 | Tentative Specification for 20mm Thick Premix Carpet Using Cationic Bitumen Emulsion | IRC 097:1987 |
| 472 | Guidelines on Accommodation of Utility Services on Roads in Urban Areas (Second Revision) | IRC 098:2011 |
| 473 | Tentative Guidelines on the Provision of Speed Breakers for Control of Vehicular Speeds on Minor Roads | IRC 099:1988 |
| 474 | Guidelines for Traffic Calming Measures in Urban and Rural Areas (First Revision) | IRC 099:2018 |
| 475 | Tentative Specification for Single Coat Bituminous Surface Dressing (First Reprint) | IRC 100:1965 |
| 476 | Tentative Specification for Single Coat Surface Dressing Using Cationic Bitumen Emulsion | IRC 100:1988 |
| 477 | Guidelines for Design of Continuously Reinforced Concrete Pavement with Elastic Joints | IRC 101:1988 |
| 478 | Traffic Studies for Planning Bypasses Around Towns | IRC 102:1988 |
| 479 | Guidelines for Pedestrian Facilities (First Revision) | IRC 103:2012 |
| 480 | Guidelines for Environmental Impact Assessment of Highway Projects | IRC 104:1988 |
| 481 | Tentative Specification for Bituminous Concrete (Asphaltic Concrete) for Airfield Pavements | IRC 105:1988 |
| 482 | Specifications for Dense Bituminous Macadam and Bituminous Concrete for Airfield Pavements (First Revision) | IRC 105:2019 |
| 483 | Guidelines for Capacity of Urban Roads in Plain Areas | IRC 106:1990 |
| 484 | Specification for Bitumen Mastic Wearing Courses (First Revision) | IRC 107:2013 |
| 485 | Guidelines for Traffic Prediction on Rural Highways | IRC 108:1996 |
| 486 | Guidelines for Traffic Forecast on Highways (First Revision) | IRC 108:2014 |
| 487 | Guidelines for Wet Mix Macadam | IRC 109:1997 |
| 488 | Guidelines for Wet Mix Macadam (First Revision) | IRC 109:2015 |
| 489 | Standard Specifications and Code of Practice for Design and Construction of Surface Dressing | IRC 110:2005 |
| 490 | Specifications for Dense Graded Bituminous Mixes | IRC 111:2009 |
| 491 | Code of Practice for Concrete Road Bridges | IRC 112:2011 |
| 492 | Code of Practice for Concrete Road Bridges | IRC 112:2020 |
| 493 | Guidelines for the Design and Construction of Geosynthetic Reinforced Embankments on Soft Subsoils | IRC 113:2013 |
| 494 | Guidelines for Use of Silica-Fume in Rigid Pavement | IRC 114:2013 |
| 495 | Guidelines for Structural Evaluation and Strengthening of Flexible Road Pavements Using Falling Weight Deflectometer (FWD) Technique | IRC 115:2014 |
| 496 | Specifications for Readymade Bituminous Pothole Patching Mix Using Cut-Back Bitumen | IRC 116:2014 |
| 497 | Guidelines for the Structural Evaluation of Rigid Pavement by Falling Weight Deflectometer (without CD) | IRC 117:2014 |
| 498 | Guidelines for Design and Construction of Continuously Reinforced Concrete Pavement (CRCP) | IRC 118:2015 |
| 499 | Guidelines for Traffic Safety Barriers | IRC 119:2015 |
| 500 | Recommended Practice for Recycling of Bituminous Pavements | IRC 120:2015 |
| 501 | Guidelines for the use of Construction and Demolition Waste in the Road Sector | IRC 121:2017 |
| 502 | Guidelines for Construction of Precast Concrete Segmental Box Culverts | IRC 122:2017 |
| 503 | Guidelines on Geophysical Investigation for Bridges | IRC 123:2017 |
| 504 | Bus Rapid Transit (BRT) Design Guidelines for Indian Cities | IRC 124:2017 |
| 505 | Guidelines on Dozers for Highway Works | IRC 125:2017 |
| 506 | Guidelines on Wet Mix Plant | IRC 126:2017 |
| 507 | Guidelines on Skill Development of Workmen in the Road Sector | IRC 127:2018 |
| 508 | Guidelines on Training of Highway Professionals | IRC 128:2019 |
| 509 | Specifications for Open-Graded Friction Course | IRC 129:2019 |
| 510 | State-of-the-Art-Report: High Embankments on Soft Ground, Part B — Ground Improvement | IRC SOR 14:1995 |
| 511 | State-of-the-Art-Report: Non-Destructive Testing Techniques of Concrete Bridges | IRC SOR 17:1996 |
| 512 | State-of-the-Art-Report: Corrosion and Corrosion Protection of Prestressed Concrete Bridges in Marine Environment | IRC SOR 18:1996 |
| 513 | Bridge Loadings Around The World | IRC SP 004:1965 |
| 514 | Type Designs for Highway Kilometre Stones (Second Revision) | IRC SP 008:1980 |
| 515 | Handbook of Quality Control for Construction of Roads and Runways | IRC SP 011:1984 |
| 516 | Guidelines for Parking Facilities in Urban Roads (First Revision) | IRC SP 012:2015 |
| 517 | Guidelines for the Design of Small Bridges and Culverts | IRC SP 013:2004 |
| 518 | A Manual for the Application of the Critical Path Method to Highway Projects in India | IRC SP 014:1980 |
| 519 | Ribbon Development Along Highways and Its Prevention | IRC SP 015:1996 |
| 520 | Guidelines for Surface Evenness of Highway Pavements | IRC SP 016:2008 |
| 521 | Guidelines on Measuring Road Roughness and Norms (Second Revision) | IRC SP 016:2019 |
| 522 | Recommendations About Overlays on Cement Concrete Pavements | IRC SP 017:1977 |
| 523 | Manual for Highway Bridge Maintenance Inspection | IRC SP 018:1996 |
| 524 | Manual for Survey, Investigation and Preparation of Road Projects (Second Revision) | IRC SP 019:2001 |
| 525 | Rural Roads Manual | IRC SP 020:2002 |
| 526 | Guidelines on Landscaping and Tree Plantation | IRC SP 021:2009 |
| 527 | Recommendation for the Sizes for each Type of Road Making Machinery to Cater to the General Demand of Road Works | IRC SP 022:1980 |
| 528 | Vertical Curves for Highways | IRC SP 023:1993 |
| 529 | Guidelines on the Choice and Planning of Appropriate Technology in Road Construction | IRC SP 024:1984 |
| 530 | Gopi and His Road Roller – Guidelines on Maintenace of Road Rollers | IRC SP 025:1984 |
| 531 | Report Containing Recommendations of IRC Regional Workshops on Rural Road Development | IRC SP 026:1984 |
| 532 | Report Containing Recommendations of the IRC Regional Workshops on Highway Safety | IRC SP 027:1984 |
| 533 | Road Transport and Energy (First Revision) | IRC SP 028:1984 |
| 534 | Directory of Indigenous Manufacturers of Road/Bridge Construction Machinery and Important Bridge Components (First Revision) | IRC SP 029:1994 |
| 535 | Manual on Economic Evaluation of Highway Projects in India (Second Revision) | IRC SP 030:2009 |
| 536 | General Guidelines About the Equipment for Bituminous Surface Dressing | IRC SP 034:1989 |
| 537 | Guidelines for Inspection and Maintenance of Bridges | IRC SP 035:1990 |
| 538 | Guidelines on Format for IRC Standards | IRC SP 036:1991 |
| 539 | Guidelines for IRC Standards (First Revision) | IRC SP 036:2018 |
| 540 | Guidelines for Evaluation of Load Carrying Capacity of Bridges | IRC SP 037:2010 |
| 541 | Manual for Road Investment Decision Model | IRC SP 038:1992 |
| 542 | Guidelines on Bulk Bitumen Transportation and Storage Equipment | IRC SP 039:1992 |
| 543 | Guidelines on Techniques for Strengthening and Rehabilitation of Bridges | IRC SP 040:1993 |
| 544 | Guidelines on Repair, Strengthening and Rehabilitation of Concrete Bridges (First Revision) | IRC SP 040:2019 |
| 545 | Guidelines for the Design of At-Grade Intersections in Rural and Urban Areas | IRC SP 041:1994 |
| 546 | Guidelines on Road Drainage (First Revision) | IRC SP 042:2014 |
| 547 | Guidelines on Low-Cost Traffic Management Techniques for Urban Areas | IRC SP 043:1994 |
| 548 | Highway Safety Code | IRC SP 044:1996 |
| 549 | Time Series Data on Road Transport Passenger and Freight Movement (1951-1991) | IRC SP 045:1996 |
| 550 | Guidelines for Design and Construction of Fibre Reinforced Concrete for Pavements (First Revision) | IRC SP 046:2013 |
| 551 | Guidelines on Quality Systems for Road Bridges | IRC SP 047:1998 |
| 552 | Hill Road Manual | IRC SP 048:1998 |
| 553 | Guidelines for the Use of Dry Lean Concrete as Sub-base for Rigid Pavement (First Revision) | IRC SP 049:2014 |
| 554 | Guidelines on Urban Drainage (First Revision) | IRC SP 050:2013 |
| 555 | Guidelines for Load Testing of Bridges (First Revision) | IRC SP 051:2014 |
| 556 | Bridge Inspector Reference Manual | IRC SP 052:1999 |
| 557 | Guidelines on Use of Modified Bitumen in Road Construction (Second Revision) | IRC SP 053:2010 |
| 558 | Project Preparation Manual for Bridges | IRC SP 054:2000 |
| 559 | Project Preparation Manual for Bridges (First Revision) | IRC SP 054:2018 |
| 560 | Guidelines on Traffic Management in Work Zones | IRC SP 055:2014 |
| 561 | Guidelines for Steel Pedestrian Bridges (First Revision) | IRC SP 056:2011 |
| 562 | Guidelines for Quality Systems for Road Construction | IRC SP 057:2000 |
| 563 | Guidelines for Use of Fly Ash in Road Embankments | IRC SP 058:1999 |
| 564 | Guidelines for Use of Geosynthetics in Road Pavements and Associated Works (First Revision) | IRC SP 059:2018 |
| 565 | An Approach Document for Assessment of the Remaining Life of Concrete Bridges | IRC SP 060:2002 |
| 566 | An Approach Document on Whole Life Costing for Bridges in India | IRC SP 061:2004 |
| 567 | Guidelines for the Design and Construction of Cement Concrete Pavement for Low-Volume Roads (First Revision) | IRC SP 062:2014 |
| 568 | Guidelines for the Use of Interlocking Concrete Block Pavement | IRC SP 063:2004 |
| 569 | Guidelines for the Use of Interlocking Concrete Block Pavement (First Revision) | IRC SP 063:2018 |
| 570 | Guidelines for the Analysis and Design of Cast-in-Place Voided Slab Superstructure | IRC SP 064:2005 |
| 571 | Guidelines for the Analysis and Design of Cast-in-Place Voided Slab Superstructure (First Revision) | IRC SP 064:2016 |
| 572 | Guidelines for the Design and Construction of Segmental Bridges | IRC SP 065:2005 |
| 573 | Guidelines for Design and Construction of Segmental Bridges (First Revision) | IRC SP 065:2018 |
| 574 | Guidelines for the Design of Continuous Bridges | IRC SP 066:2005 |
| 575 | Guidelines for Design of Continuous Bridges (First Revision) | IRC SP 066:2016 |
| 576 | Guidelines for Use of External and Unbonded Prestressing Tendons in Bridge Structures | IRC SP 067:2005 |
| 577 | Guidelines for Construction of Roller-Compacted Concrete Pavements | IRC SP 068:2005 |
| 578 | Guidelines and Specifications for Expansion Joints (First Revision) | IRC SP 069:2011 |
| 579 | Guidelines for the Use of High-Performance Concrete (Including Self-Compacting Concrete in Bridges) (First Revision) | IRC SP 070:2005 |
| 580 | Guidelines for the Use of High-Performance Concrete in Bridges | IRC SP 070:2005 |
| 581 | Guidelines for Design and Construction of Pretensioned Girder of Bridges | IRC SP 071:2006 |
| 582 | Guidelines for Design and Construction of Precast Pre-tensioned Girders for Bridges (First Revision) | IRC SP 071:2018 |
| 583 | Guidelines for the Design of Flexible Pavements for Low-Volume Rural Roads (First Revision) | IRC SP 072:2015 |
| 584 | Manual of Standards and Specifications for Two Laning of State Highways on B.O.T. Basis | IRC SP 073:2007 |
| 585 | Manual of Specifications and Standards for Two Laning of Highways with Paved Shoulder (Second Revision) | IRC SP 073:2018 |
| 586 | Guidelines for Repair and Rehabilitation of Steel Bridges | IRC SP 074:2007 |
| 587 | Guidelines for Retrofitting of Steel Bridges by Prestressing | IRC SP 075:2008 |
| 588 | Guidelines for Conventional and Thin Whitetopping (First Revision) | IRC SP 076:2015 |
| 589 | Manual for Design Construction and Maintenance of Gravel Roads | IRC SP 077:2008 |
| 590 | Specifications for Mix Seal Surfacing (MSS) Close-Graded Premix Surfacing (CGPS) | IRC SP 078:2008 |
| 591 | Tentative Specifications for Stone Matrix Asphalt | IRC SP 079:2008 |
| 592 | Guidelines for Corrosion Prevention, Monitoring and Remedial Measures for Concrete Bridge Structures | IRC SP 080:2008 |
| 593 | Tentative Specifications for Slurry Seal and Microsurfacing | IRC SP 081:2008 |
| 594 | Guideline es for the Design of Causeways and SubmeBridges bridge | IRC SP 082:2008 |
| 595 | Guidelines for Maintenance, Repairs & Rehabilitation of Cement Concrete Pavements | IRC SP 083:2008 |
| 596 | Guidelines for Maintenance, Repairs and Rehabilitation of Cement Concrete Pavements (First Revision) | IRC SP 083:2018 |
| 597 | Manual for Specifications and Standards for Four Laning of Highways ThroPublic-Privatevate Partnership (First Revision) | IRC SP 084:2014 |
| 598 | Manual of Specifications and Standards for Four Laning of Highways (Second Revision) | IRC SP 084:2019 |
| 599 | Guidelines for Variable Message Signs | IRC SP 085:2010 |
| 600 | Guidelines for Selection, Operation and Maintenance of Paver Finishers | IRC SP 086:2010 |
| 601 | Manual of Specification and Standards for Six Laning of Highways ThroPublic-Privatevate Partnership (First Revision) | IRC SP 087:2013 |
| 602 | Manual of Specifications and Standards for Six Laning of Highways (Second Revision) | IRC SP 087:2019 |
| 603 | Manual on Road Safety Audit | IRC SP 088:2010 |
| 604 | Manual on Road Safety Audit (First Revision) | IRC SP 088:2019 |
| 605 | Guidelines for Soil and Granular Material Stabilization Using Cement, Lime and Fly Ash | IRC SP 089-1:2010 |
| 606 | Guidelines for the Design of Stabilized PavePart IIPart-II) | IRC SP 089-2:2018 |
| 607 | Manual for Grade Separators and Elevated Structures | IRC SP 090:2010 |
| 608 | Guidelines for Road Tunnels (First Revision) | IRC SP 091:2010 |
| 609 | Road Map for Human Resource Development in Highway Sector | IRC SP 092:2010 |
| 610 | Guidelines on Requirements for Environmental Clearance for Road Projects | IRC SP 093:2011 |
| 611 | Guidelines on Requirements for Environmental Clearances for Road Projects | IRC SP 093:2017 |
| 612 | Material Testing Facilities for Highway Sector in National Capital Region | IRC SP 094:2011 |
| 613 | Model Contract Document for Maintenance of Highways | IRC SP 095:2011 |
| 614 | Guidelines for Selection, Operation and Maintenance of Concrete Batching and Mixing Plants | IRC SP 096:2012 |
| 615 | Guidelines on Compaction Equipment for Road Works | IRC SP 097:2013 |
| 616 | Guidelines for the Use of Waste Plastic in Hot Bituminous Mixes (Dry Process) in Wearing Courses | IRC SP 098:2013 |
| 617 | Manual of Specification and Standards for Expressways | IRC SP 099:2013 |
| 618 | Use of Cold Mix Technology in Construction and Maintenance of Roads Using Bitumen Emulsion | IRC SP 100:2014 |
| 619 | Interim Guidelines for Warm Mix Asphalt | IRC SP 101:2014 |
| 620 | Guidelines for Warm Mix Asphalt | IRC SP 101:2019 |
| 621 | Guidelines for Design and Construction of Reinforced Soil Walls | IRC SP 102:2014 |
| 622 | Guidelines on Tree Plantation along Rural Roads | IRC SP 103:2014 |
| 623 | Guidelines for Fabrication and Erection of Steel Bridges | IRC SP 104:2015 |
| 624 | Explanatory Handbook to IRC:112-2011: Code of Practice for Concrete Roads Bridges | IRC SP 105:2015 |
| 625 | Engineering Guidelines on Landslide Mitigation Measures for Indian Roads | IRC SP 106:2015 |
| 626 | Guidelines for Gap Graded Wearing Course with Rubberised Bitumen-(Bitumen Rubber) | IRC SP 107:2015 |
| 627 | Guidelines on Preparation and Implementation of Environment Management Plan | IRC SP 108:2015 |
| 628 | Guidelines for Design and Construction of Small Diameter Piles for Road Bridges | IRC SP 109:2015 |
| 629 | Application of Intelligent Transport System for Urban Roads | IRC SP 110:2017 |
| 630 | Capacity Building of Road Agencies In Charge of Implementation of Road Projects in Urban Areas | IRC SP 111:2017 |
| 631 | Manual for Quality Control in Road and Bridge works | IRC SP 112:2017 |
| 632 | Guidelines on Flood Disaster Mitigation for Highway Engineers | IRC SP 113:2018 |
| 633 | Guidelines for Seismic Design of Road Bridges | IRC SP 114:2018 |
| 634 | Guidelines for the Design of Integral Bridges | IRC SP 115:2018 |
| 635 | Guidelines for Design and Installation of Gabion Structures | IRC SP 116:2018 |
| 636 | Manual on Universal Accessibility for Urban Roads and Streets | IRC SP 117:2018 |
| 637 | Manual for Planning and Development of Urban Roads and Streets | IRC SP 118:2018 |
| 638 | Manual of Planting and Landscaping of Urban Roads | IRC SP 119:2018 |
| 639 | Explanatory Handbook to IRC:22-2015 Standard Specifications and Code of Practice for Road Bridges, Section VI-Composite Construction | IRC SP 120:2018 |
| 640 | Guidelines for Use of Iron, Steel and Copper Slag in the Construction of Rural Roads | IRC SP 121:2018 |
| 641 | Model Contract for Maintenance of Roads (Based on single Percentage Rate) | IRC SP 124:2019 |
| 642 | Guidelines for Cement Grouted Bituminous Mix Surfacing for Urban Roads | IRC SP 125:2019 |
| 643 | Guidelines for the Design and ConstructLow-Volume Volume Rural Roads Using Jute Geotextiles | IRC SP 126:2019 |
| 644 | Rural Road Safety Manual — Promoting Safer Connectivity in Rural India | MORD 18:2016 |
| 645 | Manual on Construction Equipment for Rural Roads | MORD 19:2016 |
| 646 | Quality Assurance Handbook for Rural Roads, Volume I | MORD 20:2016 |
| 647 | Quality Assurance Handbook for Rural Roads, Volume II | MORD 21:2016 |
| 648 | Measures proposed to achieve economy in the Construction of rural roads under the PMGSY | MORD 22:2015 |
| 649 | Revised and Amended Standard Bidding Document | MORD 23:2015 |
| 650 | Do It Yourself Construction of Cement Stabilized Sub Base/Base | MORD 24:2015 |
| 651 | Do It Yourself Rural Roads Construction Using Fly Ash | MORD 25:2015 |
| 652 | Do It Yourself Cell Filled Concrete Pavement | MORD 26:2015 |
| 653 | Do It Yourself Gabion Retaining Walls for Rural Roads | MORD 27:2015 |
| 654 | Grameen Sampark (December 2015) English Version | MORD 28:2015 |
| 655 | Grameen Sampark (December 2015) Hindi Version | MORD 29:2015 |
| 656 | Guidelines For Road Signages under PMGSY | MORD 30:2015 |
| 657 | Pocketbook for Road Construction Equipment | MORT 245:2018 |
| 658 | Manual for Maintenance of Roads, 1983 | MORT 246:1983 |
| 659 | Pocketbook for Highway Engineers, 2002 (Second Revision) | MORT 248:2002 |
| 660 | Pocketbook for Highway Engineers, 2019 (Third Revision) | MORT 248:2019 |
| 661 | Specifications for Road and Bridge Works, 2013 (Fifth Revision) | MORT 250:2013 |
| 662 | Standard Plan for Highway Bridges — Prestressed Concrete Beams and RCC Slab Type Superstructure Volume-II | MORT 256-2:1997 |
| 663 | Guidelines for Expressways Part I | MORT 278-1:2010 |
| 664 | Guidelines for Expressways Part I | MORT 278-2:2010 |
| 665 | Standard Data Book for Analysis of Rates (Second Revision – 2019), Volume 1: For Plain/Rolling Terrain | MORT SDB-1:2010 |
| 666 | Standard Data Book for Analysis of Rates (Second Revision – 2019), Volume 2: For Hilly Terrain | MORT SDB-2:2010 |
| IS Code – Sanitary Appliances and Water Fittings | ||
| SI.N | Code book used (Description) | IS Code number |
| 667 | Glazed Stoneware Pipe and Fittings | IS 651:2007 |
| 668 | Glazed Fire-Clay Sanitary Appliances: Part-1 General Requirements | IS 771-1:1979 |
| 669 | Glazed Fire-Clay Sanitary Appliances: Part-2 Specific Requirements of Kitchen And Laboratory Sinks | IS 771-3-1 :1979 |
| 670 | Glazed Fire Clay Sanitary Appliances: Part-3 Specific Requirements of Urinals, Section 1: Slab Urinals | IS 771-3-1 :1979 |
| 671 | Glazed Fire-Clay Sanitary Appliances, Part 3: Specific Requirements of Urinals: Section 2 Stall Urinals | IS 771-3-2 :1985 |
| 672 | Glazed Fire-Clay Sanitary Appliances, Part 4: Specific Requirements of Postmortem Slabs | IS 771-4:1979 |
| 673 | Glazed Fire-clay Sanitary Appliances, Part V: Specific Requirements of Shower Trays | IS 771-5:1979 |
| 674 | Glazed Fire-clay Sanitary Appliances, Part VI: Specific Requirements of Bed Pan Sinks | IS 771-6:1979 |
| 675 | Glazed Fire-Clay Sanitary Appliances, Part 7: Specific Requirements of Slop Sinks | IS 771-7:1981 |
| 676 | General Requirements for Enamelled Cast Iron Sanitary Appliances | IS 772:1973 |
| 677 | Flushing Cistern for Water Closets and Urinals (Other Than Plastic Cisterns) | IS 774:2004 |
| 678 | Copper Alloy Gate, Globe and Check Valves for Waterworks Purposes | IS 778:1984 |
| 679 | Water Meters (Domestic Type) | IS 779:1994 |
| 680 | Cast Copper Alloy Screw Down Bib Taps And Stop Valves for Water Services | IS 781:1984 |
| 681 | Specification for Caulking Lead | IS 782:1978 |
| 682 | mixing valves for ablutionary and domestic purposes | IS 1701:1960 |
| 683 | Water Fittings – Copper Alloy Float Valves (Horizontal Plunger Type) | IS 1703:2000 |
| 684 | self-closing taps for water supply purposes | IS 1711:1984 |
| 685 | cast iron manhole covers and frames | IS 1726:1991 |
| 686 | Pillar Taps for Water Supply Purposes | IS 1795:1982 |
| 687 | Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns) | IS 2326:1987 |
| 688 | Water Meters (Bulk Type) | IS 2373:1981 |
| 689 | plastic seats and covers for water closets, Part 1: Thermoset seats and covers | IS 2548-1:1996 |
| 690 | plastic seats and covers for water closets, Part 2: Thermoplastic seats and covers | IS 2548-2:1996 |
| 691 | vitreous sanitary appliances (vitreous china): Part 1 General requirements | IS 2556-1:1994 |
| 692 | Vitreous Sanitary Appliances (Vitreous China) – – Part 2: Specific Requirements of Washdown Water Closets | IS 2556-2:2004 |
| 693 | Vitreous Sanitary Appliances (Vitreous China) – – Part 3: Specific Requirements of Squatting Pans | IS 2556-3:2004 |
| 694 | Vitreous Sanitary Appliances (Vitreous China) – – Part 4: Specific Requirements of Wash Basins | IS 2556-4:2004 |
| 695 | vitreous sanitary appliances (vitreous china): Part 5 Specific requirements of laboratory sinks | IS 2556-5:1994 |
| 696 | Vitreous Sanitary Appliances (Vitreous China), Part 6: Specific Requirements of Urinals and Partition Plates | IS 2556-6:1995 |
| 697 | Vitreous Sanitary Appliances (vitreous china) -, Part 7: Specific Requirements of Accessories for Sanitary Appliances | IS 2556-7:1995 |
| 698 | Vitreous Sanitary Appliances (Vitreous China) -, Part 8: Specific Requirements of Pedestal Close Coupled Washdown and Symphonic Water Closets | IS 2556-8:2004 |
| 699 | Vitreous Sanitary Appliances (Vitreous China) – – Part 9: Specific Requirements of Pedestal Type Bidets | IS 2556-9:2004 |
| 700 | vitreous sanitary appliances (vitreous china): Part 14 Specific requirements of integrated squatting pans | IS 2556-14:1995 |
| 701 | Vitreous Sanitary Appliances (Vitreous China) -, Part 15: Specific Requirements of Universal Water Closets | IS 2556-15:2004 |
| 702 | Vitreous Sanitary Appliances (Vitreous China) -, Part 16: Specific Requirements of Wash Down Wall Mounted Water Closets | IS 2556-16:2002 |
| 703 | Vitreous Sanitary Appliances (Vitreous China) -, Part 17: Specific Requirements of Wall Mounted Bidets | IS 2556-17:2001 |
| 704 | Code of practice for selection, installation and maintenance of sluice valves | IS 2685:1971 |
| 705 | ferrules for water services | IS 2692:1989 |
| 706 | copper alloy waste fittings for wash basins and sinks | IS 2963:1979 |
| 707 | plug cocks for water supply purposes | IS 3004:1979 |
| 708 | chemically resistant glazed stoneware pipes and fittings | IS 3006:1979 |
| 709 | single faced sluice gates (200 to 1200 mm size) | IS 3042:1965 |
| 710 | waste plug and its accessories for sinks and wash-basins | IS 3311:1979 |
| 711 | surface boxes for sluice valves | IS 3950:1979 |
| 712 | foot valves for water works purposes | IS 4038:1986 |
| 713 | washers for use with fittings for water services | IS 4346:1982 |
| 714 | cast copper alloy traps: Part 1 ‘P’ and ‘S’ traps | IS 5219-1:1969 |
| 715 | Swing Check Type Reflux (Non-Return] Valves for Water Works Purposes, Part 1: Single-Door Pattern | IS 5312-1:2004 |
| 716 | Swing Check Type Reflux (non-return) Valves for Water Works Purpose, Part 2: Multi-Door Pattern | IS 5312-2:1986 |
| 717 | cast-iron steps for manholes | IS 5455:1969 |
| 718 | cast iron gratings for drainage purposes | IS 5961:1970 |
| 719 | gel-coated glass fibre-reinforced polyester resin bathtubs | IS 6411:1985 |
| 720 | Method for performance testing of water meters (domestic type) | IS 6784:1996 |
| 721 | plastic flushing cisterns for water closets and urinals | IS 7231:1994 |
| 722 | copper alloy fancy single taps, combination tap assembly and stop valves for water services | IS 8931:1993 |
| 723 | Method for a sampling of vitreous and fire clay sanitary appliances | IS 9140:1996v |
| 724 | cast iron screw-down stop valves and stop and check valves for water works purposes | IS 9338:1984 |
| 725 | pressure-reducing valves for domestic water supply systems | IS 9739:1981 |
| 726 | flush valves and fittings for water closets and urinals | IS 9758:1981 |
| 727 | polyethene floats (spherical) for float valves | IS 9762:1994 |
| 728 | Plastics Bib Taps, Pillar Taps, Angle Valves and Stop Valves for Hot and Cold Water Services | IS 9763:2000 |
| 729 | glass fibre reinforced polyester resins (GRP) squatting pans | IS 11246:1992 |
| 730 | plastic equilibrium float valve for cold water services | IS 12234:1988 |
| 731 | rotational moulded polyethene water storage tanks | IS 12701:1996 |
| 732 | diaphragm type (plastic body) float-operated valves for complex water services | IS 13049:1991 |
| 733 | forged brass gate, globe and check valves for water works purposes | IS 13114:1991 |
| 734 | Cast iron single faced thimble mounted sluice gates | IS 13349:1992 |
| 735 | stainless steel sinks for domestic purposes | IS 13983:1994 |
| 736 | Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (GRP) Sectional Water Storage Tanks, Part 1: panels, Part 2 Guidelines for assembly, installation and test | IS 14399-1&2 :1996 |
| 737 | Resilient Seated Cast Iron Air Relief Valves for Water Works Purposes | IS 14845:2000 |
| 738 | Sluice Valve for Water Works Purposes (50 to 1200 mm Size) | IS 14846:2000 |
| IS Code – Flooring, Wall Finishing and Roofing | ||
| S.N. | Code book used (Description) | IS Code number |
| 739 | Linoleum Sheets And Tiles | IS 653:1992 |
| 740 | Materials for Use In The Manufacture of Magnesium Oxychloride Flooring Compositions | IS 657:1982 |
| 741 | Code of Practice for Magnesium Oxychloride Composition Floors | IS 658:1982 |
| 742 | Rubber Flooring Materials For General Purposes | IS 809:1992 |
| 743 | Bitumen-Mastic for Flooring | IS 1195:2002 |
| 744 | Code of practice for laying bitumen mastic flooring | IS 1196:1978 |
| 745 | Code of practice for laying rubber floors | IS 1197:1970 |
| 746 | Code of practice for laying, fixing and maintenance of linoleum floor | IS 1198:1982 |
| 747 | Cement Concrete Flooring Tiles – Specification | IS 1237:2012 |
| 748 | Code of practice for laying and finishing cement concrete flooring tiles | IS 1443:1972 |
| 749 | sand for plaster | IS 1542:1992 |
| 750 | mason’s tools for plaster work and pointing work | IS 1630:1984 |
| 751 | Code of practice for the application of cement and cement-lime plaster finishes | IS 1661:1972 |
| 752 | Code of practice for laying in-situ terrazzo floor finish | IS 2114:1984 |
| 753 | Code of practice for the application of lime plaster finish | IS 2394:1984 |
| 754 | Code of Practice for External Rendered Finishes | IS 2402:1963 |
| 755 | Code of practice for laying in-situ cement concrete flooring | IS 2571:1970 |
| 756 | PVC-asbestos floor tiles | IS 3461:1980 |
| 757 | unbacked flexible PVC flooring | IS 3462:1986 |
| 758 | Methods of Test for Plastic Flooring and Wall Tiles | IS 3464:1986 |
| 759 | Code of practice for the use of silicate-type chemical-resistant mortars | IS 4441:1980 |
| 760 | Code of practice for the use of sulphur-type chemical-resistant mortars | IS 4442:1980 |
| 761 | Code of practice for the use of resin-type chemical-resistant mortars | IS 4443:1980 |
| 762 | Methods of Test for Chemical Resistant Mortars, Part I: Silicate Type and Resin Type | IS 4456-1:1967 |
| 763 | Methods of test for chemical resistant mortars, Part II: Sulphur type | IS 4456-2:1967 |
| 764 | Ceramic unglazed vitreous acid-resisting tile | IS 4457:2007 |
| 765 | Code of practice for laying epoxy resin floor toppings | IS 4631:1986 |
| 766 | chemical resistant mortars, Part I: Silicate type | IS 4832-1:1969 |
| 767 | Chemical Resistant Mortars, Part II: Resin type | IS 4832-2:1969 |
| 768 | chemical resistant mortars, Part III: Sulphur type | IS 4832-3:1968 |
| 769 | acid-resistant bricks | IS 4860:1968 |
| 770 | Recommendations for selection of industrial floor finishes | IS 4971:2007 |
| 771 | Pitch-Mastic for Bridge Decking and Roads | IS 5317:2002 |
| 772 | Code of practice for laying flexible PVC sheets and tile flooring | IS 5318:1969 |
| 773 | Code of practice for laying of in-situ granolithic concrete floor topping | IS 5491:1969 |
| 774 | Code of practice for laying burnt clay brick flooring | IS 5766:1970 |
| 775 | Code of Practice for Whitewashing and Colour-washing | IS 6278:1971 |
| 776 | Recommendations for selection of dairy floor finishes | IS 7956:1975 |
| 777 | Bitumen Mastic, Anti-Static and Electrically Conducting Grade | IS 8374:1977 |
| 778 | Methods of Tests for Epoxy Resins, Hardeners and Epoxy Resin Compositions for Floor Topping | IS 9162:1979 |
| 779 | epoxy resin, hardeners and epoxy resin compositions for floor topping | IS 9197:1979 |
| 780 | bitumen mastic acid-resisting grade | IS 9510:1980 |
| 781 | Methods of tests for linoleum sheets and tiles | IS 9704:1980 |
| 782 | Method of Test for Materials for Use in the Preparation of Magnesium Oxychloride Flooring Compositions | IS 10132:1982 |
| 783 | Glossary of terms relating to building finishes | IS 10403:1983 |
| 784 | corrugated bitumen roofing sheets | IS 12583:1988 |
| 785 | plastic translucent sheets made from thermosetting polyester resin (glass fibre reinforced) | IS 12866:1989 |
| 786 | bitumen mastic for flooring for industries handling LPG and other light hydrocarbon products | IS 13026:1991 |
| 787 | Code of practice for laying bitumen mastic flooring for industries handling LPG and other light hydrocarbon products | IS 13074:1991 |
| 788 | Ceramic Tiles – Methods of Test, Sampling and Basis for Acceptance | IS 13630-1 to 15:2006 |
| 789 | Ceramic Tiles-Methods of Test, Sampling and Basis of Acceptance, Part 1: Determination of Dimensions and Surface Quality | IS 13630-1:2006 |
| 790 | Ceramic Tiles-Methods of the test, Sampling and Basis of Acceptance, Part 2: Determination of water absorption (see IS 13630: Parts 1 to 15) | IS 13630-2:2006 |
| 791 | Ceramic Tiles – Methods of Test Part, Sampling and Basis of Acceptance 3 Determination of moisture expansion using boiling water – Unglazed tiles (see IS 13630: Parts 1 to 15) | IS 13630-3:2006 |
| 792 | Ceramic Tiles – Methods of Test, Sampling and Basis of Acceptance, Part 4: Determination of linear thermal expansion (see IS 13630: Parts 1 to 15) | IS 13630-4:2006 |
| 793 | Ceramic Tiles – Methods of Test, Sampling and Basis of Acceptance, Part 5: Determination of resistance to thermal shock (see IS 13630: Parts 1 to 15) | IS 13630-5:2006 |
| 794 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 6: Determination of modulus of rupture (see IS 13630: Parts 1 to 15) | IS 13630-6:2006 |
| 795 | Ceramic Tiles – Methods of the test, Part 7: Determination of chemical resistance – Unglazed tiles(see IS 13630: Parts 1 to 15) | IS 13630-7:2006 |
| 796 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 8: Determination of chemical resistance – Glazed tiles (see IS 13630: Parts 1 to 15) | IS 13630-8:2006 |
| 797 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 9: Determination of crazing resistance – Glazed tiles (see IS 13630: Parts 1 to 15) | IS 13630-9:2006 |
| 798 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 10: Determination of frost resistance (see IS 13630: Parts 1 to 15) | IS 13630-10:2006 |
| 799 | Ceramic Tiles – methods of test, Sampling and Basis of Acceptance, Part 11: Determination of resistance to surface abrasion – Glazed tiles [see IS 13630 (Parts 1 to 15)] | IS 13630-11:2006 |
| 800 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 12: Determination of resistance to deep abrasion – Unglazed tiles (see IS 13630: Parts 1 to 15) | IS 13630-12:2006 |
| 801 | Ceramic Tiles – Methods of the test, Sampling and Basis of Acceptance, Part 13: Determination of scratch hardness of a surface according to MOHS (see IS 13630: Parts 1 to 15) | IS 13630-13:2006 |
| 802 | Ceramic tiles – Definitions, classifications, characteristics and marking | IS 13712:2006 |
| 803 | Checkered cement concrete tiles | IS 13801:1993 |
| 804 | Checkered cement concrete tiles – Specification | IS 13801:2013 |
| 805 | Laying of Pitch-Mastic Flooring for Industries Handling Heavy Hydrocarbon Products Like Kerosene, Diesel and Furnace Oil – Code of Practice | IS 15193:2002 |
| 806 | Pitch-Mastic Flooring for Industries Handling Heavy Hydrocarbon Products Like Kerosene, Diesel and Furnace Oil | IS 15194:2002 |
| 807 | Laying of Plastic Translucent Sheets Made from Thermosetting Polyester Resin (Glass Fibre Reinforced) Alone or in Conjunction with Asbestos Cement Sheets/Steel Sheets/Aluminium Sheets – Code of Practice | IS 15224:2002 |
| 808 | Wall Coverings in Roll Form – Vocabulary and Symbols | IS 15401:2003 |
| 809 | Wall Coverings in Roll form for Finished Wall Papers, Wall Vinyls and Plastic Wall Coverings | IS 15418:2003 |
| 810 | Pressed ceramic tiles | IS 15622:2006 |
| 811 | Precast concrete blocks for paving | IS 15658:2006 |
| IS Code Book – Stones | ||
| SI.N | Code book used (Description) | IS Code number |
| 812 | Methods of test for determination of strength properties of natural building stones, Part I: Compressive strength | IS 1121-1:1974 |
| 813 | Methods of Test for Determination of Strength Properties of Natural Building Stones, Part II: Transverse Strength | IS 1121-2:1974 |
| 814 | Methods of Test for Determination of Strength Properties of Natural Building Stones, Part III: Tensile Strength | IS 1121-3:1974 |
| 815 | Methods of test for determination of strength properties of natural building stones, Part IV: Shear strength | IS 1121-4:1974 |
| 816 | Method of test for determination of true specific gravity of natural building stones | IS 1122:1974 |
| 817 | Method of identification of natural building stones | IS 1123:1975 |
| 818 | Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones | IS 1124:1974 |
| 819 | Method of test for determination of weathering of natural building stones | IS 1125:1974 |
| 820 | Method of test for determination of durability of natural building stones | IS 1126:1974 |
| 821 | Recommendations for dimensions and workmanship of natural building stones for masonry work | IS 1127:1970 |
| 822 | Limestone (Slab and Tiles) | IS 1128:1974 |
| 823 | Recommendation of dressing natural building stones | IS 1129:1972 |
| 824 | marble (blocks, slabs and tiles) | IS 1130:1969 |
| 825 | Method for determination of resistance to wear by abrasion of natural building stones | IS 1706:1972 |
| 826 | Glossary of terms relating to stones, quarrying and dressing | IS 1805:1973 |
| 827 | structural granite | IS 3316:1974 |
| 828 | laterite stone block for masonry | IS 3620:1979 |
| 829 | sandstone (slabs and tiles) | IS 3622:1977 |
| 830 | Method of test for determination of water transmission rate by capillary action through natural building stones | IS 4121:1967 |
| 830 | Method of test for surface softening of natural building stones by exposure to acidic atmospheres | IS 4122:1967 |
| 832 | Methods of test for determination of permeability of natural building stones | IS 4348:1973 |
| 833 | Method of Test for Toughness of Natural Building Stones | IS 5218:1969 |
| 834 | Method of test for determining aggregate impact value of soft coarse aggregates | IS 5640:1970 |
| 835 | Method of Test for Determination of Stripping Value of Road Aggregates | IS 6241:1971 |
| 836 | Roofing Slate Tiles | IS 6250:1981 |
| 837 | Coarse Aggregate for Water Bound Macadam | IS 6579:1981 |
| 838 | Schedule for properties and availability of stones for construction purposes, Part I: Gujarat state, Section 1: Availability of stones | IS 7779-1-1:1975 |
| 839 | Schedule for properties and availability of stones for construction purposes, Part I: Gujarat state: Section 2 Engineering properties of building stones | IS 7779-1-2:1975 |
| 840 | Schedule for properties and availability of stones for construction purposes, Part I: Gujarat state: Section 3 Engineering properties of stone aggregates | IS 7779-1-3:1975 |
| 841 | Schedule for properties and availability of stones for construction purposes, Part II: Maharashtra state, Section 1: Availability of stones | IS 7779-2-1:1979 |
| 842 | Schedule of properties and availability of stones for construction purposes, Part II: Maharashtra state, Section 2: Engineering properties of building stones | IS 7779-2-2:1979 |
| 843 | Schedule for Properties and Availability of Stones for Construction Purposes, Part II: Maharashtra State, Section 3: Engineering Properties of Stone Aggregates | IS 7779-2-3:1979 |
| 844 | Schedule for Properties and Availability of Stones for Construction Purposes, Part III: Tamil Nadu State, Section 2: Engineering Properties of Building Stones | IS 7779-3-2:1980 |
| 845 | Schedule for Properties and Availability of Stones for Construction Purposes, Part III: Tamil Nadu State, Section 3: Engineering Properties of Stone Aggregates | IS 7779-3-3:1980 |
| 846 | Code of practice for stacking and packing stone slabs for transportation | IS 8348:1977 |
| 947 | Recommended practice for quarrying stones for construction purposes | IS 8381:1977 |
| 848 | Code of practice for maintenance and preservation of stones in building | IS 8759:1977 |
| 849 | stone lintels | IS 9394:1979 |
| 850 | polished building stones, Part 1: Granite | IS 14223-1:1995 |
| 851 | Schedule of properties and availability of stones for construction purposes, Part IV: Karnataka states Sections (1 to 3) | IS 7779-4-1 to 3:1996 |
| 852 | Schedule for Properties and Availability of Stones for Construction Purposes, Part 5: Andhra Pradesh State – Sections 1 to 3 | IS 7779-5-1 to 3:1997 |
| IS Code – Timber and Timber Stores | ||
| SI.N | Code book used (Description) | IS Code number |
| 853 | Plywood Tea Chests: Part-1 General | IS 10-1:1990 |
| 854 | Plywood Tea Chests: Part-2 Plywood | IS 10-2:1996 |
| 855 | Plywood Tea-Chests: Part-3 Battens | IS 10-3:1974 |
| 856 | Plywood Tea Chests: Part-4 Metal Fittings | IS 10-4:1989 |
| 857 | Plywood Tea Chests, Part 5: Assembly and Packing | IS 10-5:1976 |
| 858 | Coniferous Sawn Timber (Baulks and Scantlings) | IS 190:1991 |
| 859 | Permissible Moisture Content For Timber Used For Different Purposes – Recommendations | IS 287:1993 |
| 860 | Classification of Commercial Timbers and Their Zonal Distribution | IS 399:1963 |
| 861 | Preservation of Timber – Code of Practice | IS 401:2001 |
| 862 | Wooden Tool Handles General Requirements | IS 620:1985 |
| 863 | Logs for Plywood | IS 656:1988 |
| 864 | Timber Technology And Utilization of Wood, Bamboo and Cane – Glossary of Terms | IS 707:2011 |
| 865 | Wood Poles for Overhead Power And Telecommunication Lines | IS 876:1992 |
| 866 | logs for matches | IS 1140:1988 |
| 867 | Seasoning of timber- Code of practice | IS 1141:1993 |
| 868 | Trade names and abbreviated symbols for timber species | IS 1150:2000 |
| 869 | Non-coniferous sawn timber (Baulks and scantlings) | IS 1326:1992 |
| 870 | cut sizes of timber | IS 1331:1971 |
| 871 | wooden packing cases | IS 1503:1988 |
| 872 | wood wool for general packaging purposes | IS 1707:1979 |
| 873 | Methods of testing of small transparent specimens of timber | IS 1708-1:to:18:1986 |
| 874 | Timber for aircraft construction in converted form (finished form) | IS 1898:1990 |
| 875 | Methods of tests for wood poles | IS 1900:1974 |
| 876 | Preservation of bamboo and cane for non-structural purposes – Code of practice | IS 1902:2006 |
| 877 | wooden tent pins | IS 2133:1983 |
| 878 | converted timber for lorry bodies | IS 2179:1979 |
| 879 | Wooden cross arms | IS 2203:1993 |
| 880 | Timber for cooling towers | IS 2372:2004 |
| 881 | Tables for volumes of cut sizes of timber | IS 2377:1967 |
| 882 | Methods of static tests of timber in structural sizes | IS 2408:1963 |
| 883 | Method of sampling of model trees and logs and their conversion for timber testing | IS 2455:1990 |
| 884 | battened plywood cases | IS 2674:1988 |
| 885 | Guide for installation of impregnation plants for timber | IS 2683:1980 |
| 886 | Methods for estimation of preservatives in treated timber and in treating solutions, Part 1: Determination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil | IS 2753-1:1991 |
| 887 | Methods for estimation of preservatives in treated timber and in treating solutions, Part 2: Determination of copper (in copper organic preservative salt) and pentachlorophenol | IS 2753-2:1991 |
| 888 | wooden handles for felling axes and hand axes | IS 2891:1975 |
| 889 | Wooden handles for picks and beaters | IS 2892:1993 |
| 890 | Wooden handles for adzes | IS 2893:1992 |
| 891 | wooden handles for woodworking chisels and gouges | IS 2894:1987 |
| 892 | Wooden handles for rasps, engineers’ files and engineers’ scrapers- | IS 2895:1990 |
| 893 | wooden handles for carpenters’ augers | IS 2896:1978 |
| 894 | wooden handles for shovels | IS 2897:1983 |
| 895 | wooden tent mallets | IS 2922:1975 |
| 896 | cane baskets for general purposes | IS 3053:1977 |
| 897 | wooden crates | IS 3071:1981 |
| 898 | Pencil slats | IS 3084:1989 |
| 899 | bullies for general purposes | IS 3337:1978 |
| 900 | Methods of measurement and evaluation of defects in timber, Part 1: Logs | IS 3364-1:1976 |
| 901 | Methods of measurement and evaluation of defects in timber, Part 2: Converted timber | IS 3364-2:1976 |
| 902 | wooden fence posts | IS 3386:1979 |
| 903 | wooden boxes for packaging apples | IS 3728:1985 |
| 904 | teak squares | IS 3731:1985 |
| 905 | wooden beaters | IS 3806:1966 |
| 906 | willow clefts for cricket bats | IS 4422:1985 |
| 907 | Hand-sawing of timber – Guide | IS 4423:1999 |
| 908 | timber for use in coal mines | IS 4424:1967 |
| 909 | wooden anvil blocks | IS 4650:1968 |
| 910 | Methods for field testing of preservatives in wood | IS 4833:1993 |
| 911 | Methods of laboratory testing of wood preservatives against fungi and borers (powder post beetles) : Part 1 Determination of threshold values of wood preservatives against fungi | IS 4873-1:2008 |
| 912 | Methods of laboratory testing of wood preservatives against fungi and borers (powder post beetles) : Part 2 Determination of threshold values of wood preservatives against borers (powder post beetles) | IS 4873-2:2008 |
| 913 | teak logs | IS 4895:1985 |
| 914 | Method of testing timber connector joints | IS 4907:2004 |
| 915 | Wooden handles for hand hammers- | IS 4953:1989 |
| 916 | Critical for identification of commercial timbers | IS 4970:1973 |
| 917 | Coniferous logs | IS 5246:2000 |
| 918 | converted timber (coniferous): Part 1 Light furniture | IS 5247-1:1982 |
| 919 | converted timber (coniferous): Part 2 Packing cases and crates | IS 5247-2:1982 |
| 920 | non-coniferous timber in converted form for ammunition/explosives boxes | IS 5806:1970 |
| 921 | Wooden handles for POWRAHS | IS 5942:1989 |
| 922 | Non-coniferous timber in converted form for general purposes | IS 5966:1993 |
| 923 | Code of practice for the design of wood poles for overhead power and telecommunication lines | IS 5978:1970 |
| 924 | jointed wood poles for overhead power and telecommunication lines | IS 6056:1970 |
| 925 | Method of laboratory test for the efficacy of wood preservatives against soft rot | IS 6341:1971 |
| 926 | Method of tests for timber props for mines | IS 6346:1971 |
| 927 | Method of test for the efficacy of preservatives and evaluating the natural durability of timbers used in cooling towers | IS 6497:1990 |
| 928 | Guiding principles for grading and inspection of timber | IS 6534:1971 |
| 929 | wooden discs for tents | IS 6641:1985 |
| 930 | mason’s mallets | IS 6642:1986 |
| 931 | wooden pins for bivouac tents | IS 6643:1987 |
| 932 | tinman’s mallets | IS 6644:1986 |
| 933 | caulking mallets | IS 6656:1986 |
| 934 | Timber species suitable for wooden packaging – | IS 6662:1993 |
| 935 | bossing (plumbers), mallets | IS 6676:1986 |
| 936 | Glossary of wooden packaging terms | IS 6703:1972 |
| 937 | willow logs for artificial limbs | IS 6707:1972 |
| 938 | Code of practice for maintenance of wood poles for overhead power and telecommunication lines | IS 6711:1972 |
| 939 | wooden paddles | IS 6729:1972 |
| 940 | Method of testing natural durability of timber and efficacy of the wood preservatives against marine borers | IS 6791:1973 |
| 941 | Method of tests for bamboo | IS 6874:2008 |
| 942 | Non-coniferous logs | IS 7308:1999 |
| 943 | Guidelines for design, installation and testing of timber seasoning kilns (Compartment type with cross-forced air circulation) | IS 7315:1974 |
| 944 | bamboo tent poles | IS 7344:1974 |
| 945 | Vase for store tent | IS 7548:1992 |
| 946 | timber half-wrought for sporting rifles | IS 7549:1975 |
| 947 | returnable wooden crates for vegetables | IS 7698:1983 |
| 948 | wooden box for microscope slides | IS 7850:1975 |
| 949 | plywood cases for packing tobacco for export | IS 7992:1983 |
| 950 | packaging of plywood, blockboards and flush doors for export | IS 8001:1976 |
| 951 | Methods of tests for split bamboo | IS 8242:1976 |
| 952 | Evaluation of working quality of timber under different woodworking operations- Method of test | IS 8292:1992 |
| 953 | bamboo chicks, Part 1: Fine | IS 8295-1:1976 |
| 954 | bamboo chicks, Part 2: Coarse | IS 8295-2:1976 |
| 955 | Methods of sampling of timber scantlings from depots and their conversion for testing | IS 8720:1978 |
| 956 | rebound wooden boxes | IS 8725:1978 |
| 957 | rebound wooden crates | IS 8726:1978 |
| 958 | Methods of presentation of data on physical and mechanical properties of timber | IS 8745:1994 |
| 959 | Preservation of bamboo for structural purposes – Code of practice | IS 9096:2006 |
| 960 | Guide for storage and protection of logs and sawn timber | IS 9104:1979 |
| 961 | Code of practice for felling and conversion of trees into logs | IS 9561:1985 |
| 962 | Guide for mill sawing of timber | IS 9576:1980 |
| 963 | non-returnable wooden boxes for horticulture produce | IS 9590:1980 |
| 964 | water-soluble type wood preservatives, Part 1: Acid-copper-chrome (ACC) preservative | IS 10013-1:1981 |
| 965 | water-soluble type wood preservatives, Part 2: Copper-chrome-arsenic (CCA) wood preservative | IS 10013-2:1981 |
| 966 | water-soluble type wood preservatives, Part 3: Copper-chrome-boron (CCB) wood preservative | IS 10013-3:1981 |
| 967 | bamboo supports for camouflaging equipment | IS 10145:1982 |
| 968 | wooden sleepers for railway track | IS 10394:1982 |
| 969 | pin-needle hardboard boxes for packaging apples | IS 10402:1982 |
| 970 | Method of determination of sound absorption coefficient of timber by standing wave method | IS 10420:1982 |
| 971 | wooden toggles | IS 10499:1983 |
| 972 | Guidelines for nailing of large framed wooden containers | IS 10687:1983 |
| 973 | Code of practice for preservation of wooden sleepers for railway track by pressure treatment | IS 10753:1983 |
| 974 | Method of determination of thermal conductivity of timber | IS 10754:1983 |
| 975 | sweeping brooms | IS 11100:1984 |
| 976 | carpenter’s mallets | IS 11106:1984 |
| 977 | wooden casks and barrels | IS 11131:1984 |
| 978 | The moisture content of timber and timber products- Methods for determination | IS 11215:1991 |
| 979 | Recommendations for off-road transportation of timber | IS 11288:1985 |
| 980 | Indian timbers for door and window shutters and frames- Classification | IS 12896:1990 |
| 981 | Determination of dielectric constant of wood under microwave frequencies- Method of test | IS 13621:1993 |
| 982 | Indian timbers for furniture and cabinets- Classification | IS 13622:1993 |
| 983 | Preservative-treated and seasoned sawn timber from rubber wood (Hevea Brasiliensis) | IS 14960:2001 |
| 984 | Grading rules for split canes | IS 15455:2004 |
| 985 | Grading rules for unsplit canes | IS 15456:2004 |
| 986 | Logs for production of sliced veneers | IS 15457:2004 |
| 987 | Classification of Indian canes and their zonal distribution | IS 15458:2004 |
| 988 | Design, Installation and Testing of Solar Timber Seasoning Kiln – Guidelines | IS 15890:2010 |
| 989 | Handbook on Timber Engineering | SP 33:1986 |
| IS Code Book – Functional Requirements in Buildings | ||
| SI.N | Code book used (Description) | IS Code number |
| 990 | Code of practice for sound insulation of non-industrial buildings | IS 1950:1962 |
| 991 | Guide for Daylighting of Buildings | IS 2440:1975 |
| 992 | Code of practice for the acoustic design of auditoriums and conference halls | IS 2526:1963 |
| 993 | Code of Practice for Industrial Ventilation | IS 3103:1975 |
| 994 | Code of practice for natural ventilation of residential buildings | IS 3362:1977 |
| 995 | Code of practice for noise reduction in industrial buildings | IS 3483:1965 |
| 996 | Guide for heat insulation of non-industrial buildings | IS 3792:1978 |
| 997 | Recommendations for noise reduction in town planning | IS 4954:1968 |
| 998 | Recommendations for Buildings and Facilities for the Physically Handicapped | IS 4963:1987 |
| 999 | Code of practice for construction of underground air-raid shelters in natural soil | IS 5499:1969 |
| 1000 | Code of Practice for Daylighting of Factory Buildings | IS 6060:1971 |
| 1001 | Code of Practice for Functional Requirements of hotels, restaurants and other food service establishments Daylighting of Factory Buildings | IS 6074:1971 |
| 1002 | Recommendations for orientation of buildings, Part 1: Non-industrial buildings | IS 7662-1:1974 |
| 1003 | Code of practice for daylighting of educational buildings | IS 7942:1976 |
| 1004 | Recommendations for basic requirements of school buildings | IS 8827:1978 |
| 1005 | Glossary of terms applicable to acoustics in buildings | IS 9736:1981 |
| 1006 | Rating of sound insulation in buildings and building elements, Part 1: Airborne sound insulation in buildings and of interior building elements | IS 11050-1:1984 |
| 1007 | Rating of sound insulation in buildings and of building elements, Part 2: Impact sound insulation | IS 11050-2:1984 |
| 1008 | Rating of sound insulation in buildings and building elements, Part 3: Airborne sound insulation of facade elements and facades | IS 11050-3:1984 |
| 1009 | Recommendations for calculation of solar radiation on buildings | IS 11907:1986 |
| 1010 | Code of practice for ventilation in petrochemical plants and refineries | IS 12332:1988 |
| 1011 | An audible emergency evacuation signal | IS 13735:1993 |
| 1012 | Handbook on Functional Requirements of Industrial Buildings (Lighting and Ventilation) | SP 32:1986 |
| 1013 | Handbook of Typified Designs for Structures with Steel Roof Trusses (With and Without Cranes) (Based on IS Codes) | SP 38:1987 |
| 1014 | Handbook on Structures with Steel Portal Frames (Without Cranes) | SP 40:1987 |
| 1015 | Handbook on Functional Requirements of Buildings (Other than Industrial Buildings) | SP 41:1987 |
| 1016 | Handbook on Structures with Steel Lattice Portal Frames (Without Cranes) | SP 47:1988 |
| IS Code Book – Builder Hardware | ||
| SI.N | Code book used (Description) | IS Code number |
| 1017 | Tower Bolts – Specification: Part-1 Ferrous Metals | IS 204-1:1991 |
| 1018 | Tower Bolts – Specification Part-2 Non-Ferrous Metals | IS 204-2:1992 |
| 1019 | Non-Ferrous Metal Butt Hinges -Specification | IS 205:1992 |
| 1020 | Tee and Strap Hinges – Specification | IS 206:2010 |
| 1021 | Door Handles -Specification | IS 208:1996 |
| 1022 | Mild Steel Sliding Door Bolts for Use With Padlocks -Specification | IS 281:2009 |
| 1023 | Parliament Hinges -Specification | IS 362:1991 |
| 1024 | Hasps and Staples -Specification | IS 363:1993 |
| 1025 | Fanlight Catch -Specification | IS 364:1993 |
| 1026 | Door Spring, Rat-Tail Type – Specification | IS 452:1973 |
| 1027 | Double Acting Spring Hinges -Specification | IS 453:1993 |
| 1028 | Specification For Rim Latches | IS 1019:1974 |
| 1029 | Steel butt hinges | IS 1341:1992 |
| 1030 | Specification for floor door stoppers | IS 1823:1980 |
| 1031 | Specification for fanlight pivots | IS 1837:1966 |
| 1032 | Non-ferrous metal sliding door bolts (drops) with padlocks -Specification | IS 2681:1993 |
| 1033 | Hydraulically Regulated Door Closers -Specification | IS 3564:1995 |
| 1034 | Continuous (Piano) hinges -Specification | IS 3818:1992 |
| 1035 | Specification for ventilator chains | IS 3828:1966 |
| 1036 | Steel back flap hinges -Specification | IS 3843:1995 |
| 1037 | Specification for indicating bolts for use in public baths and lavatories | IS 4621:1975 |
| 1038 | Specification for door handles for mortice lock (vertical type) | IS 4992:1975 |
| 1039 | Specification for flush bolts | IS 5187:1972 |
| 1040 | Specification – bath-room latches | IS 5899:1970 |
| 1041 | Floor springs (hydraulically regulated) for heavy doors | IS 6315:1992 |
| 1042 | Specification -plastic window stays and fasteners | IS 6318:1971 |
| 1043 | Specification for Door Closers (Pneumatically Regulated) for Light Doors Weighing up to 40 kg | IS 6343:1982 |
| 1044 | Specification for hold fast | IS 7196:1974 |
| 1045 | Specification for double action floor springs (without oil check) heavy door | IS 7197:1974 |
| 1046 | Specification for sliding locking bolts for use with padlocks | IS 7534:1985 |
| 1047 | Specification for mortice ball catches for use in the wooden almirah | IS 8756:1978 |
| 1048 | Specification for rising butt hinges | IS 9106:1979 |
| 1049 | Specification for Flush Drop Handle for Drawers | IS 9460:1980 |
| 1050 | Specification for hat, coat and wardrobe hooks | IS 9899:1981 |
| 1051 | Specification for mild steel stays and fasteners | IS 10019:1981 |
| 1052 | Specification for numerical | IS 10090:1982 |
| 1053 | Specification for the curtain rail system | IS 10342:1982 |
| 1054 | Stainless steel butt hinges – Specification | IS 12817:1997 |
| 1055 | Stainless steel butt hinges – Specification | IS 12817:2013 |
| 1056 | PVC Handrail Covers – Specification | IS 12867:1989 |
| 1057 | Door Closers, Concealed Type (Hydraulically Regulated) | IS 14912:2001 |
| 1058 | Stainless steel tower bolts -Specification | IS 15833:2009 |
| 1059 | Stainless Steel Sliding Door Bolts for use with Padlocks – Specification | IS 15834:2008 |
| 1060 | Stainless steel sliding door bolts for use with padlocks -Specification Bilingual) | IS 15834:2008 |
